Daikin FFQ25BV1B - Page 302

Disassembly and Maintenance ESIE05-04
5–52 Part 5 – Disassembly and Maintenance
3
1
5
5
Q Precaution during swing
motor insttallation
1 Engage the swing
motor-side gear with the
panel-side one.
(Otherwise, faulty
swinging operation or
abnormal noise may be
caused.)
Install the motor after
checking of correct gear
engagement.
2 Install the swing motor in
reverse process of
removal procedure.
Q When install the decoration
panel, be careful not to catch
the lead wire.
3 After installing the swing
motor, be sure to turn on
the power switch for
resetting (for initializing
the vane positions).
Step Procedure Points
Motor-side gear
Panel-side gear
(S2649)