Specifications ESIE05-04
1–50 Part 1 – System Outline
2.6 FDQ – B
Technical
specifications
The table below contains the technical specifications.
Electrical
specifications
The table below contains the electrical specifications.
Specification FDQ125B7V3B FDQ200B7V3B FDQ250B7V3B
Heat exchanger Rows x stages x fin pitch 3 x 14 x 1.75 mm 3 x 24 x 2.00 mm
Face area 0.338 m² 0.634 m²
Tube type Hi-XSS diam. 7 Hi-XSS (8)
Fin type Rhombus Non-symmetric fin
Fan Air flow rate cooling 43.0 m³/min 69 m³/min 89 m³/min
Air flow rate heating 43.0 m³/min 69 m³/min 89 m³/min
Qty x model (rotor + motor) 1 x
DPA216-178NB
1 x
DPC241-241NB
Fan speed 1 step (direct drive)
Fan type Sirocco
Refrigerant Type R410A
Safety and functional devices Fan motor thermal fuse: 160 °C
Air filter Resin net (with mold resistant)
Temperature control Microprocessor thermostat for cooling and
heating
Weight Unit 59.0 kg 93 Kg
Specification FDQ125B7V3B FDQ200B7V3B FDQ250B7V3B
Unit Phase 1~ 1~ 1~
Voltage 230 V 230 V 230 V
Frequency 50Hz 50Hz 50Hz
Power consumption _ _ _
Nominal running current _ _ _
Fan motor FLA (Full Load Amps) 4.2 A 6.8 A 7.6 A
No. of motors x output 1 x 500 W 1 x 650 W 1 x 1000 W
To Next Page
Loading...
