Daikin FFQ50C2VEB - Wireless Remote Controller

Field Setting from Remote Controller ESIE15-13B
66 Field Setting
2.2 Wireless Remote Controller
Setting
To set the field settings, you have to change:
 “Mode No.”
 “First code No.”
 “Second code No.”.
To change the field settings, proceed as follows:
RESERVE button
INSPECTION/TEST button
Mode No.
Field setting mode
UP button
DOWN button
First code No.
Second code No.
MODE button
Step Action
1 Hold down the INSPECTION/TEST button for at least 4 s during normal mode to enter
the “Field setting mode”.
2 Press the MODE button to select the desired “Mode No.”.
3 Press the UP button to select the “First code No.”.
4 Press the DOWN button to select the “Second code No.”
5 Press the RESERVE button to set the present settings.
6 Press the INSPECTION/TEST button to return to the “Normal mode”.