Why does my Daikin FH(Y)35BJV1 Air Conditioner stop after starting?
Your Daikin Air Conditioner might stop operating after starting if the air inlet or outlet of the outdoor or indoor unit is blocked by obstacles. Remove any obstructions to ensure proper ventilation. Another possible reason is a clogged air filter. In this case, ask a qualified service person to clean the air filters.
What to do if Daikin FH(Y)35BJV1 does not turn on?
If your Daikin Air Conditioner isn't turning on, it could be due to a power failure, in which case you should wait until the power is restored. Alternatively, the fuse may have blown or the breaker may have tripped. If this is the case, change the fuse or reset the breaker.
Why is my Daikin FH(Y)35BJV1 not cooling or heating enough?
There could be several reasons why your Daikin Air Conditioner isn't cooling or heating sufficiently. Check if the air inlet or outlet of either the indoor or outdoor unit is blocked by obstacles and remove any obstructions to ensure proper ventilation. Other potential causes include a clogged air filter (consult a qualified service person to clean it), an improper temperature setting (refer to ADJUSTMENT), a low fan speed (refer to ADJUSTMENT), an incorrect air flow angle (refer to AIR FLOW DIRECTION ADJUST), open doors or windows (close them to prevent drafts), direct sunlight entering the room (use curtains or blinds), too many people in the room (cooling effect decreases if heat gain of the room is too large), or excessive heat sources in the room (cooling effect decreases if heat gain...
General| Cooling Capacity | 3.5 kW |
|---|---|
| Heating Capacity | 4.0 kW |
| Energy Efficiency Class (Cooling) | A++ |
| Energy Efficiency Class (Heating) | A+ |
| Airflow Rate | 10.5 m³/min |
| Outdoor Unit Noise Level | 48 dB(A) |
| Type | Split System |
| Refrigerant | R32 |
| Power Supply | 220-240 V / 50 Hz |
To Next Page
