Need help?Do you have a question about the Daikin FHC24NUV2S and is the answer not in the manual?
General| Indoor Unit Dimensions (W x H x D) | 990 x 298 x 234 mm |
|---|---|
| Outdoor Unit Dimensions (W x H x D) | 845 x 695 x 300 mm |
| Inverter | Yes |
| Type | Split AC |
| Refrigerant | R32 |
| Star Rating | 3 |
Troubleshooting steps for when the equipment fails to operate, including potential causes like fuse issues or component failures.
Diagnostic steps for when the indoor fan works, but the compressor remains inactive, indicating potential PCB or switch failures.
Troubleshooting for operation that starts and then stops immediately, potentially due to pressure switches or refrigerant issues.
Steps to resolve issues where the unit runs but does not provide cooling, possibly due to refrigerant shortage or airflow problems.
Guides on identifying and resolving issues related to excessive noise or vibration from the unit, often caused by installation or component contact.
Details on using the remote controller's inspection/test functions to diagnose errors and clear error history.
A comprehensive table listing error codes, descriptions, and applicable model series for indoor units.
Guidance for 'A1' errors indicating indoor unit PCB issues, including checks for E²PROM data and external factors.
Troubleshooting for 'A9' errors related to the electronic expansion valve coil, involving checks for connection and resistance.
Diagnosing 'E3' errors for high pressure issues, including checks on switches, refrigerant, and PCB.
Steps for 'E5' errors indicating compressor motor lock, covering wiring, PCB, and pressure conditions.
Troubleshooting for 'H4' errors concerning the low pressure sensor system, checking connections, continuity, and PCB.
Diagnosing 'LC' errors for transmission issues between control PCB and inverter PCB, checking wiring and PCB.
Guidance for 'U0' errors indicating refrigerant shortage, involving checks on refrigerant levels and piping.
To Next Page