Need help?Do you have a question about the Daikin FTKM12UVLWZ and is the answer not in the manual?
General| Inverter | Yes |
|---|---|
| Capacity | 1 Ton |
| Cooling Capacity | 3.5 kW |
| Star Rating | 3 Star |
| Refrigerant | R32 |
| Weight (Indoor Unit) | 10 kg |
| Noise Level (Outdoor Unit) | 48 dB |
| Type | Split |
| Power Supply | 230 V, 50 Hz |
Explains the significance of WARNING and CAUTION labels in the manual.
Describes the meaning of safety symbols used throughout the manual.
Critical warnings regarding installation by qualified personnel, correct parts, and electrical safety.
Cautions regarding flammable gas, drain piping, flare nuts, and animal interference.
Explains the significance of WARNING and CAUTION labels in the manual.
Describes the meaning of safety symbols used throughout the manual.
Critical warnings for safe operation, avoiding harmful gases, and electrical hazards.
Cautions regarding intended use, airflow, electrical safety, and supervision of children.
Guidelines for positioning the indoor unit regarding obstructions, sunlight, heat, and interference.
Guidelines for positioning the outdoor unit regarding airflow, wind, gas leaks, and corrosion.
Specifies minimum clearance requirements for outdoor unit installation.
Identifies and describes the components of the indoor unit.
Identifies and describes the components of the outdoor unit.
Identifies and describes the buttons and display of the remote controller.
Provides tips for optimal use and troubleshooting for the remote controller.
Visual guide for installing both indoor and outdoor units.
Details on installing the mounting plate for the indoor unit.
Instructions for preparing pipe holes and caulking for installation.
Step-by-step guide for attaching and detaching the indoor unit.
Instructions for removing and reinstalling the indoor unit's front panel.
Procedure for opening the service lid on the indoor unit.
Guide for setting addresses for multiple indoor units.
Detailed steps for securely installing the indoor unit's mounting plate.
Instructions for drilling wall holes and installing pipes.
Steps for attaching the indoor unit to the mounting plate.
Instructions for routing refrigerant pipes and drain hose from the left side.
Guidelines for installing pipes embedded within the wall structure.
Detailed instructions for electrical wiring connections.
Steps for connecting the drain hose and ensuring proper drainage.
Procedure for correctly flaring refrigerant pipe ends to prevent leaks.
Guidelines for connecting refrigerant pipes, including torque specifications.
Precautions for handling pipes and selecting insulation materials.
Steps for removing air and checking for refrigerant leaks.
Instructions for electrical wiring connections.
Guidance on proper drain setup for the outdoor unit.
Procedures for performing trial operation and checking system functionality.
A checklist of items to verify for proper installation.
Detailed steps for safely pumping down refrigerant.
Instructions on inserting batteries and safety precautions.
Basic guidance on using the remote controller.
Steps for attaching optional accessory filters.
Instruction to turn on the main circuit breaker.
Recommendations for energy-efficient operation.
Information regarding battery usage, replacement, and handling.
Explanation of the three primary operating modes.
Steps to initiate and terminate unit operation.
How to adjust the target temperature.
Important notes on COOL, DRY, and FAN operations.
Instructions to enable automatic swing for airflow direction.
How to activate and cancel the 3-D airflow mode.
Steps to manually set flap positions during auto swing.
Explanation of 3-D airflow benefits for room comfort.
How to adjust the fan speed.
Instructions to activate SMELL PROOF for odor prevention.
How to disable the SMELL PROOF function.
Notes on airflow rate effects and SMELL PROOF limitations.
How to activate COANDA mode for upward airflow.
How to activate POWERFUL mode for maximum cooling effect.
Important notes regarding COANDA and POWERFUL operations.
General information on using timer functions for automatic on/off.
Explanation of ECONO mode for limiting power consumption.
Important notes about timer and ECONO mode limitations.
Detailed steps for using the GOOD SLEEP OFF TIMER function.
Instructions for setting CHILD LOCK and activating FLASH STREAMER air purification.
Information about streamer discharge technology.
Steps to initiate DEW CLEAN operation for heat exchanger cleaning.
How to adjust the brightness of the unit's indicator lamps.
Important notes regarding DEW CLEAN operation.
General instructions for cleaning the indoor unit and remote controller.
Detailed steps for cleaning the front panel.
List of cleaning agents and materials to avoid.
Instructions for cleaning and reattaching air filters.
Steps to prepare the unit for extended periods of non-operation.
Recommendation for professional maintenance services.
Maintenance instructions for Ag-ion and Micro filters.
Maintenance instructions for the titanium apatite filter.
Explanations for common occurrences that are not actual unit malfunctions.
Descriptions of various sounds and their possible causes.
Explains why the outdoor unit might emit water or steam.
Explains mist formation from the indoor unit during cooling.
Possible causes and solutions for odors from the indoor unit.
Reasons for the outdoor fan rotating when the unit is off.
Troubleshooting steps for a non-functional remote controller.
Checklist for common issues before requesting service.
Critical warnings requiring immediate professional assistance.
Information on proper disposal of the air conditioner and its components.
Procedure to retrieve error codes via the remote controller.
Table listing error codes and their meanings.
Procedures for checking refrigerant presence and flammable atmospheres.
Requirements for fire extinguishers and ignition source control.
Safety checks for electrical equipment, devices, and wiring.
Methods for detecting refrigerants and leaks.
Procedures for refrigerant disposal, charging, and equipment labeling.
Procedures for recovering refrigerants using appropriate equipment.
Tables showing maximum refrigerant load and minimum room size.
Notes on surge protectors, circuit breakers, ignition sources, and refrigerant properties.
Procedures for recovering refrigerants using appropriate equipment.
Tables showing maximum refrigerant load and minimum room size.
Notes on surge protectors, circuit breakers, ignition sources, and refrigerant properties.
Procedures for checking refrigerant and flammable atmospheres.
Requirements for fire extinguishers and ignition source control.
Safety checks for electrical equipment and wiring.
Procedures for leak detection, disposal, charging, and labeling.
Procedure to retrieve error codes via the remote controller.
Table listing error codes and their meanings.
Critical warnings requiring immediate professional assistance.
Information on proper disposal of the air conditioner.
Possible causes and solutions for indoor unit odors.
Reasons for the outdoor fan rotating when the unit is off.
Troubleshooting steps for a non-functional remote controller.
Checklist for common issues before requesting service.
Explanations for common occurrences that are not unit malfunctions.
Descriptions of various sounds and their possible causes.
Explains why the outdoor unit might emit water or steam.
Explains mist formation from the indoor unit during cooling.
Maintenance instructions for Ag-ion and Micro filters.
Maintenance instructions for the titanium apatite filter.
Instructions for cleaning and reattaching air filters.
Steps to prepare the unit for long periods of non-operation.
Recommendation for professional maintenance services.
Detailed steps for cleaning the front panel.
List of cleaning agents and materials to avoid.
Steps to initiate DEW CLEAN operation for heat exchanger cleaning.
How to adjust the brightness of indicator lamps.
Important notes regarding DEW CLEAN operation.
Detailed steps for using the GOOD SLEEP OFF TIMER function.
Instructions for setting CHILD LOCK and activating FLASH STREAMER air purification.
How to enable and disable CHILD LOCK.
General information on using timer functions.
Explanation of ECONO mode for limiting power consumption.
Important notes about timer and ECONO mode limitations.
How to activate COANDA mode for upward airflow.
How to activate POWERFUL mode for maximum cooling.
Important notes regarding COANDA and POWERFUL operations.
How to adjust the fan speed.
Instructions to activate PRUEBA DE OLOR for odor prevention.
Notes on airflow effects and PRUEBA DE OLOR limitations.
Instructions to enable automatic swing for airflow direction.
How to activate and cancel the 3-D airflow mode.
Steps to manually set flap positions.
Explanation of 3-D airflow benefits.
Steps to initiate and terminate unit operation.
How to adjust the target temperature.
Notes on COOL, DRY, and FAN operations.
Safety precautions regarding battery handling.
Instructions on inserting batteries into the remote controller.
Basic guidance on using the remote controller.
Steps for attaching accessory filters.
Instruction to turn on the main circuit breaker.
Recommendations for energy saving and battery handling.
Procedures for performing trial operation and checking system functionality.
A checklist of items to verify for proper installation.
Detailed steps for pumping down refrigerant.
Steps for removing air and checking for refrigerant leaks.
Instructions for electrical wiring connections.
Guidance on proper drain setup for the outdoor unit.
General instructions for installing the outdoor unit.
Procedure for flaring refrigerant pipe ends.
Guidelines for connecting refrigerant pipes.
Precautions for handling pipes and selecting insulation materials.
Detailed instructions for electrical wiring connections.
Steps for connecting the drain hose.
Instructions for routing pipes and drain hose from the left side.
Guidelines for installing pipes embedded within the wall.
Detailed steps for installing the indoor unit's mounting plate.
Instructions for drilling wall holes and installing pipes.
Steps for attaching the indoor unit to the mounting plate.
Step-by-step guide for attaching and detaching the indoor unit.
Tips for installation near the ceiling.
Instructions for removing and reinstalling the front panel.
Procedure for opening the service lid.
Guide for setting addresses for multiple indoor units.
Diagram for installing the mounting plate.
Diagram for drilling wall holes and installing pipes.
Diagram showing indoor unit attachment with piping.
Identifies and describes remote controller buttons and display.
Tips for remote controller usage and sensitivity.
Identifies and describes indoor unit components.
Identifies and describes outdoor unit components.
Guidelines for positioning the indoor unit.
Guidelines for positioning the outdoor unit.
Specifies minimum clearance requirements for outdoor unit installation.
Warnings about personal injury or loss of life.
Cautions regarding property damage or injury.
General safety instructions for operation.
Warnings about personal injury or loss of life due to improper installation.
Cautions regarding property damage or injury from improper installation.
Describes the meaning of safety symbols.
To Next Page