To Next PageTo Next Page
Need help?Do you have a question about the Daikin FTQ42PBVJU and is the answer not in the manual?
General| Model | FTQ42PBVJU |
|---|---|
| Category | Heat Pump |
| Cooling Capacity | 4.2 kW |
| Heating Capacity | 5.0 kW |
| Refrigerant | R32 |
| Sound Level (Outdoor) (dB(A)) | 50 dB(A) |
| Voltage (V) | 220-240 V |
| Cooling Capacity (BTU) | 14300 BTU |
| Heating Capacity (BTU) | 17100 BTU |
| Seasonal Energy Efficiency Ratio (SEER) | 5.6 |
| Power Supply | Single Phase, 50 Hz |
Imminent hazards leading to death or serious injury. Avoid installation in flammable areas or near gas leaks.
Potential hazards leading to death or serious injury. Proper repair and maintenance are crucial.
Potential hazards leading to minor/moderate injury or unsafe practices. Avoid improper use or water exposure.
Buttons for selecting operation mode and adjusting fan speed.
Details on Menu/OK, Navigation, On/Off, and Cancel buttons.
Explanation of the Operation Lamp and LCD display functionality.
Guide to selecting modes, setting temperature, and using On/Off buttons.
Pre-operation power application and how to select Cool, Heat, Auto, or Fan modes.
Procedure for cleaning or replacing the air filter, and understanding filter indicator messages.
Step-by-step guide on removing, cleaning (vacuum or washing), and reattaching the air filter.
How to reset the filter indicator on the remote controller after cleaning.
Addressing system non-operation, fan speed variations, and white mist output.
Identifying normal operational noises and unit odors.
Interpreting remote controller display messages like connection status.
Procedures for safety device activation, switch failures, water leaks, and error codes.
Troubleshooting power failures, blown fuses/breakers, blocked inlets/outlets, and insufficient performance.
Troubleshooting performance issues related to open doors/windows, sunlight, or room occupancy.
