What to do if my Daikin FTS25BVMB Air Conditioner has a burning smell?
- AAndrea LutzSep 7, 2025
If there is a burning smell coming from your Daikin air conditioner, immediately turn the breaker OFF and call the service shop.
What to do if my Daikin FTS25BVMB Air Conditioner has a burning smell?
If there is a burning smell coming from your Daikin air conditioner, immediately turn the breaker OFF and call the service shop.
What to do if Daikin FTS25BVMB operation stops suddenly? (OPERATION lamp is on)
If your Daikin Air Conditioner stops suddenly and the OPERATION lamp is on, it might be due to a sudden large voltage fluctuation. For system protection, the air conditioner automatically resumes operation in about 3 minutes.
Why Daikin Air Conditioner operation does not start soon?
If your Daikin Air Conditioner doesn't start immediately after pressing the ON/OFF button soon after stopping or reselecting the mode, wait for about 3 minutes.
Why Daikin FTS25BVMB outdoor unit emits water or steam?
The outdoor unit of your Daikin Air Conditioner may emit water or steam. This can occur in HEAT mode when frost on the outdoor unit melts during defrost operation. In COOL or DRY mode, moisture in the air can condense on the cool surface of the outdoor unit piping and drip.
Why is my Daikin FTS25BVMB Air Conditioner cooling or heating effect poor?
The cooling or heating effect may be poor because the air filters are not clean, there's something blocking the air inlet or outlet of the indoor and outdoor units, the temperature setting is inappropriate, the windows and doors are not closed, the airflow rate and direction are not set appropriately, or the unit is set to INTELLIGENT EYE mode. Please, check these settings.
What to do if my Daikin FTS25BVMB Air Conditioner operation stops suddenly and the OPERATION lamp flashes?
If your Daikin Air Conditioner stops suddenly and the OPERATION lamp flashes, clean the air filters or remove any obstacles. Then, turn the breaker OFF, turn it back ON, and try operating the air conditioner with the remote controller.
What to do if my Daikin FTS25BVMB Air Conditioner power cord is abnormally hot or damaged?
If the power cord of your Daikin air conditioner is abnormally hot or damaged, turn the breaker OFF and call the service shop.
What to do if my Daikin FTS25BVMB Air Conditioner switch or a button often fails to work properly?
If a switch or a button on your Daikin air conditioner often fails to work properly, turn the breaker OFF and call the service shop.
Why does Daikin Air Conditioner release mists from the indoor unit?
Mists may come out of the indoor unit of your Daikin Air Conditioner when the air in the room is cooled into mist by the cold airflow during cooling operation.
Why Daikin FTS25BVMB Air Conditioner hot air does not flow out soon after the start of heating operation?
If hot air doesn't flow out immediately after starting the heating operation on your Daikin Air Conditioner, allow 1 to 4 minutes for the system to warm up. The system is designed to discharge air only after reaching a certain temperature.
Brand | Daikin |
---|---|
Model | FTS25BVMB |
Category | Air Conditioner |
Language | English |
Essential safety guidelines to prevent injury, damage, or malfunction of the air conditioner.
Identification and description of the indoor unit, outdoor unit, and remote controller.
Steps to prepare the unit for first-time use, including battery installation and remote controller setup.
How to start, stop, and change operation modes like AUTO, DRY, COOL, HEAT, and FAN.
Adjusting fan speed and directing airflow using flaps and louvers for optimal comfort.
Maximizing cooling or heating effect quickly for a limited time.
Recording and recalling preferred temperature and air flow rate settings for convenience.
Using the infrared sensor for automatic energy saving based on room occupancy and movement.
Setting ON and OFF timers for automatic scheduling of air conditioner operation.
Detailed procedures for cleaning the unit, filters, and performing routine checks.
Guidance on diagnosing and resolving common operational problems and error codes.
Information on when to contact service and proper disposal methods for the unit.