Daikin FTXA20A - Page 63

2 | Components
Service manual
63
FTXA20~50A(W)(S)(T) + FTXA20~50B(B)(S)(T) + RXA42+50A +
RXA20~35A(9) + RXA42+50B
Split Stylish R32
ESIE18-03D – 2021.05
c Expansion valve body
a b
a Expansion valve pipe
b Expansion valve body
INFORMATION
The expansion valve and coil can have a different configuration / layout.
8 Reinstall the putty.
9 To install the expansion valve coil, see "2.3.2Repair procedures"[460].
10 Perform a pressure test, see "3.2.1Checking procedures"[4158].
11 Add refrigerant to the refrigerant circuit, see "3.2.2 Repair
procedures"[4162].
About the installation of the expansion valve motor
NOTICE
Select the correct type.
To install the expansion valve coil with clip
1 Install the expansion valve coil on the expansion valve body.
INFORMATION
The expansion valve coil is equipped with a pipe retention clip. Install the pipe
retention clip over the pipe to lock the expansion valve coil.