Daikin FTXA25A2V1BW - To Operate the User Interface

3 | About the system
User reference guide
13
CTXA15+FTXA25~50(A)(B)2V1B(W)(S)(T)(B)
Daikin room air conditioner
4P518786-1F – 2020.05
3.2.3 To operate the user interface
a
≥500
(mm)
a Signal receiver
Note: Make sure that there are no obstacles within 500 mm under the signal
receiver. They may influence reception performance of the user interface.
1 Aim the signal transmitter at the signal receiver on the indoor unit (maximum
distance for communication is 7m).
Result: When the indoor unit receives a signal from the user interface, you will
hear a sound:
Sound Description
Beep-beep Operation starts.
Beep Setting changes.
Long beep Operation stops.