Daikin FTXC20EV1B - Page 13

ENGLISH
13
3. Check the ON/OFF and timer LEDs on the indoor unit display.
If ON/OFF LED... …and timer LED… …then wireless LAN is…
ON/OFF LED
TIMER LED
blinks blinks not connected
is off blinks in 0.5 second
interval
running and ready to connect
to the home network via WPS
button on the router.
is off blinks in 1 second
interval
• connected to the home network
via SSID + KEY.
or
• connected to the home network
via WPS button on the router.
4. Press to exit the menu.
• The display will return to the default screen.
 To connect the wireless LAN to your home network
• The wireless adapter can be connected to your home network using the:
• WPS button on the router (if present),
• SSID and KEY number located on the unit
 To connect using WPS button
1. On home screen menu, press and hold
button for at least 5 seconds while the unit
is not operating.
• Result: The SP menu
appears. is blinking.
2. Change to the SP menu
by pressing once or repeatedly.
1x
(5 sec.)
3. Press to confirm the selection.
• Result:
is blinking. The timer LED is blinking in 0.5 second interval and the ON/OFF LED is off.
4. Press the WPS button on your communication device (e.g. router) within approximately
1 minute. Refer to the manual of your communication device.
• Result: If the connection to your communication device is successful, the timer LED is blinking
in 1.0 second interval and the ON/OFF LED is off.
• If the connection with your router is not possible, try procedure “To connect using SSID and
KEY number”
5. Press
to exit the menu.
• Result: The display will return to the default screen.
 To connect using SSID and KEY number
1. On home screen menu, press and hold
button for at least 5 seconds while the unit
is not operating.
• Result: The SP menu
appears. is blinking.
2. Change to the SP menu
by pressing twice or repeatedly.
2x
(5 sec.)
1-OM_FTXC_DAIKIN_3P621306-4 D_EN_A4.indd 131-OM_FTXC_DAIKIN_3P621306-4 D_EN_A4.indd 13 21/3/2025 8:49:42 AM21/3/2025 8:49:42 AM