ENGLISH
14
Note
•
Once wireless LAN connection is turned off, any input from ONECTA app will not be sent to the unit.
3. Press to confirm the selection.
• Result:
is blinking. The timer LED and ON/OFF LED are blinking simultaneously.
4. Open the ONECTA application on your smart device and follow the steps on the screen.
• Result: If the connection to your smart device is successful, the timer LED is blinking in
1.0 second interval and the ON/OFF LED is off.
5. Press
to exit the menu.
• Result: The display will return to the default screen.
To reset the connection setting to the factory default
• Reset the connection setting to the factory default in case you want to:
• Disconnect the wireless LAN and the communication device (e.g. router) or smart device.
• Repeat the setting if the connection was unsuccessful.
1. On home screen menu, press and hold
button for at least 5 seconds while the unit
is not operating.
• Result: The SP menu
appears. is blinking.
2. Change to the SP menu
by pressing twice or repeatedly.
2x
(5 sec.)
3. Press for at least 2 seconds to confirm the selection.
• Result:
is blinking. The ON/OFF and timer LEDs are blinking at the same time in 1.0 second
interval. The setting is reset to the factory default.
4. Press
to exit the menu.
• Result: The display will return to the default screen.
To turn off the wireless LAN connection
• If you want to turn off the wireless connection function:
1. On home screen menu, press and hold
button for at least 5 seconds while the unit
is not operating.
• Result: The SP menu
appears. is blinking.
2. Change to the SP menu
by pressing once or repeatedly.
1x
(5 sec.)
3. Press for at least 2 seconds to confirm the selection.
• Result:
is blinking. The ON/OFF and timer LEDs are blinking alternately in 1.0 second
interval. Communication is OFF.
4. Press
to exit the menu.
• Result: The display will return to the default screen.
1-OM_FTXC_DAIKIN_3P621306-4 D_EN_A4.indd 141-OM_FTXC_DAIKIN_3P621306-4 D_EN_A4.indd 14 21/3/2025 8:49:42 AM21/3/2025 8:49:42 AM
To Next Page
Loading...
