To Next PageTo Next PageWhy hot air does not flow out soon after the start of HEAT operation in Daikin FTXM35M2V1B?
If hot air doesn't flow out soon after starting HEAT operation on your Daikin Air Conditioner, it's likely because the unit is warming up. Allow 1 to 4 minutes for the system to reach a certain temperature before it starts discharging air.
How to fix Daikin FTXM35M2V1B ON/OFF TIMER if it does not operate according to the settings?
If your Daikin Air Conditioner's ON/OFF TIMER isn't working right, check if the ON/OFF TIMER and the WEEKLY TIMER are set to the same time.
What to do if Daikin FTXM35M2V1B Air Conditioner operation stopped suddenly and the OPERATION lamp is on?
If your Daikin Air Conditioner suddenly stops and the OPERATION lamp is on, it might be due to a large voltage fluctuation. The air conditioner will automatically resume operation in about 3 minutes for system protection.
What to do if my Daikin FTXM35M2V1B Air Conditioner operation stopped suddenly and the OPERATION lamp flashes?
If your Daikin Air Conditioner operation stopped suddenly and the OPERATION lamp is flashing, take these steps: * Ensure the air filters are clean and clean them if necessary. * Check for any obstructions blocking the air inlet or outlet of the indoor and outdoor units. * Turn the breaker off, remove any obstacles, and then turn it back on. Try operating the air conditioner with the remote controller again. If the lamp continues to flash, contact the service shop where you purchased the air conditioner.
Why is the cooling/heating effect poor in my Daikin FTXM35M2V1B?
If your Daikin Air Conditioner isn't cooling or heating well, consider these possible causes: * Check if the air filters are clean. * Make sure nothing is blocking the air inlet or outlet of the indoor and outdoor units. * Ensure the temperature setting is appropriate. * Verify that the windows and doors are closed. * Confirm that the airflow rate and direction are set correctly.
Why the ON/OFF TIMER does not operate according to the settings in my Daikin FTXM35M2V1B?
If the ON/OFF TIMER on your Daikin Air Conditioner isn't working as expected, check if the ON/OFF TIMER and the WEEKLY TIMER are set to the same time.
Why hot air does not flow out soon after the start of HEAT operation of my Daikin Air Conditioner?
If hot air does not flow out soon after starting HEAT operation on your Daikin Air Conditioner, it's likely because the unit is warming up. Please wait 1 to 4 minutes, as the system is designed to discharge air only after reaching a certain temperature.
How to fix Daikin FTXM35M2V1B Air Conditioner that does not operate?
If your Daikin Air Conditioner isn't operating and the OPERATION lamp is off, check these items: * See if a breaker has turned off or a fuse has blown. * Check for a power failure. * Ensure batteries are correctly installed in the remote controller. * Verify the timer setting is correct.
Why is the cooling (heating) effect poor in my Daikin FTXM35M2V1B Air Conditioner?
If your Daikin Air Conditioner isn't providing sufficient cooling or heating, consider these potential causes: * Check if the air filters are clean. * Make sure nothing is blocking the air inlet or outlet of either the indoor or outdoor units. * Verify that the temperature setting is appropriate. * Ensure all windows and doors are closed. * Confirm the air flow rate and direction are properly set.
Why is my Daikin Air Conditioner remote controller not working properly?
If your Daikin Air Conditioner's remote controller isn't working correctly, the batteries might be low. Try replacing them with new AAA.LR03 alkaline batteries.
General| Brand | Daikin |
|---|---|
| Model | FTXM35M2V1B |
| Category | Air Conditioner |
| Language | English |
