Need help?Do you have a question about the Daikin FTXN12KEVJU and is the answer not in the manual?
General| Cooling Capacity | 3.5 kW |
|---|---|
| Heating Capacity | 4.0 kW |
| Seasonal Energy Efficiency Ratio (SEER) | 6.1 |
| Type | Split |
| Power Supply | 50 Hz |
| Refrigerant | R32 |
Lists various functions available for the air conditioner.
Technical specifications for cooling-only models, including capacity, dimensions, and electrical data.
Technical specifications for heat pump models, including capacity, dimensions, and electrical data.
Details connector and part information for indoor unit PCBs.
Details connector and part information for outdoor unit PCBs.
Provides an overview of the main functions of the air conditioner system.
Explains the purpose and function of different thermistors used in the system.
Details control specifications including mode hierarchy and frequency control.
Information on handling and operating the air conditioner post-installation.
Covers remote controller, operation modes, and settings for 09/12 class units.
Covers remote controller, operation modes, and settings for 15/18/24 class units.
Explains troubleshooting based on LED status for indoor and outdoor units.
Lists common unit symptoms and their corresponding diagnostic measures.
Details methods for accessing and utilizing the service check function for diagnosis.
Provides a comprehensive list of error codes and their associated descriptions.
Guides on troubleshooting specific components like PCB, motors, and thermistors.
Covers troubleshooting for signal errors, voltage issues, and refrigerant shortages.
Provides detailed procedures for checking components like thermistors and valves.
Step-by-step guides for removing components of the 09/12 class indoor unit.
Step-by-step guides for removing components of the 15/18/24 class indoor unit.
Procedure for removing components of the 09/12 class outdoor unit.
Procedure for removing components of the 15/18/24 class outdoor unit.
Instructions for pump down operation when relocating or disposing of the unit.
Details the procedure for starting and ending the forced cooling operation.
Guides on performing trial operation to verify functions and parts post-installation.
Covers model type, temperature display, and room configuration settings.
Instructions for applying silicon grease to outdoor unit PCB heat radiation parts.
Provides piping diagrams specific to indoor units.
Provides piping diagrams specific to outdoor units.
Provides wiring diagrams for indoor units, crucial for troubleshooting.
Provides wiring diagrams for outdoor units, crucial for troubleshooting.
To Next Page
