13
English
POWERFUL Operation
POWERFUL operation quickly maximizes the cooling (heating) effect
in any operation mode. You can get the maximum capacity.
To start POWERFUL operation
Press 1. .
POWERFUL operation ends in 20 minutes. Then the •
system automatically operates again with the previous
settings which were used before POWERFUL operation.
“ •
” is displayed on the LCD.
To cancel POWERFUL operation
Press 2. again.
“ • ” disappears from the LCD.
NOTE
Notes on POWERFUL operation
POWERFUL operation can only be set when the unit is running.•
POWERFUL operation will not increase the capacity of the air conditioner if the air •
conditioner is already in operation with its maximum capacity demonstrated.
In COOL, HEAT and AUTO operation•
To maximize the cooling (heating) effect, the capacity of outdoor unit is increased and the
airfl ow rate is fi xed to the maximum setting.
The temperature and airfl ow settings are not variable.
In DRY operation•
The temperature setting is lowered by 2.5°C and the airfl ow rate is slightly increased.
In FAN operation•
The airfl ow rate is fi xed to the maximum setting.
01_EN_3P276856-1B.indb 1301_EN_3P276856-1B.indb 13 12/20/2010 4:17:22 PM12/20/2010 4:17:22 PM
To Next Page
Loading...
Need help?
General
