R
Robert LandrySep 5, 2025
Why Daikin FTXS35CVMB Air Conditioner operation does not start soon?
- RrobertcraigSep 5, 2025
You should wait for about 3 minutes for the Daikin Air Conditioner operation to start.
To Next PageTo Next PageWhy Daikin FTXS35CVMB Air Conditioner operation does not start soon?
You should wait for about 3 minutes for the Daikin Air Conditioner operation to start.
Why hot air does not flow out soon after the start of heating operation in Daikin FTXS35CVMB?
After starting the heating operation of your Daikin Air Conditioner, you should wait for 1 to 4 minutes for hot air to flow out.
What to do if my Daikin Air conditioning does not operate and the OPERATION lamp is off?
If your Daikin air conditioner isn't operating and the OPERATION lamp is off, check the following: Has a breaker turned OFF or a fuse blown? Is there a power failure? Are batteries properly set in the remote controller? Is the timer setting correct?
Why is the cooling or heating effect poor in my Daikin FTXS35CVMB?
If the cooling or heating effect of your Daikin Air Conditioner is poor, check whether the air filters are clean.
How to stop the bad odor from my Daikin Air conditioning indoor unit?
If the indoor unit gives out an odor, it is recommended to have the indoor unit washed by a technician. Consult the service shop where you bought the air conditioner.
What to do if an abnormality (such as a burning smell) occurs with Daikin Air conditioning?
If an abnormality, such as a burning smell, occurs, turn the breaker OFF and call the service shop.
What to do if there is a burning smell coming from Daikin Air conditioning?
If you notice a burning smell, immediately turn the breaker OFF and call the service shop.
What to do if I hear an abnormal sound during Daikin Air conditioning operation?
If you hear an abnormal sound during operation, turn the breaker OFF and call the service shop.
Why is my Daikin FTXS35CVMB outdoor unit leaking water?
In HEAT mode, the frost on the outdoor unit melts into water or steam during defrost operation. In COOL or DRY mode, moisture in the air condenses into water on the cool surface of the outdoor unit piping and drips.
What to do if Daikin FTXS35CVMB Air Conditioner operation stopped suddenly (OPERATION lamp is on)?
If the Daikin Air Conditioner operation stopped suddenly and the OPERATION lamp is on, it will automatically resume operation in about 3 minutes.
General| Cooling Capacity | 3.5 kW |
|---|---|
| Heating Capacity | 4.0 kW |
| Energy Efficiency Ratio (EER) | 3.21 |
| Seasonal Energy Efficiency Ratio (SEER) | 6.1 |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R32 |
| Weight (Indoor Unit) | 9 kg |
| Outdoor Unit Dimensions (HxWxD) | 550 x 845 x 320 mm |
| Energy Efficiency Ratio (Cooling) | 3.21 |
| Type | Split System Air Conditioner |
Essential safety instructions for operating the air conditioner.
Identifies and describes components of the indoor and outdoor units.
Steps required before starting the air conditioner for the first time.
Identifies and describes components of the indoor unit.
Identifies and describes components of the outdoor unit.
Instructions for using the remote controller for operation.
Instructions for mounting the remote controller holder.
Precautions and tips for using the remote controller.
Instructions for installing batteries in the remote controller.
Steps to set the current time on the remote controller.
Procedure for turning on the air conditioner breaker.
Advice on optimizing energy consumption for efficiency.
Steps to turn the unit on, off, and select modes.
How to adjust temperature and fan speed for comfort.
Specific considerations for HEAT, COOL, DRY, and AUTO modes.
How to control horizontal and vertical airflow direction for comfort.
Information on flap and louver angle dependencies and precautions.
Activate maximum cooling/heating effect for a short period.
Reduce the noise level of the outdoor unit.
Record and recall preferred temperature and airflow settings.
Turn the human movement detection feature on and off.
Adjust sensor angle, energy saving, and precautions.
How to set and cancel ON and OFF timers.
Automatic temperature adjustment for comfortable sleep.
Set both on and off timers simultaneously for flexible control.
Select operation modes for multiple indoor units.
Night Quiet Mode, Mode Lock, and Quiet Operation.
How designated priority rooms affect operation and features.
Instructions for cleaning units and filters.
Essential checks before operating the unit.
Procedures for preparing the unit for extended non-use.
Scenarios that are not faults but require waiting.
Steps to re-verify issues before contacting a repair person.
Critical symptoms requiring immediate professional service.
Guidelines for proper disposal of the air conditioning product.
Advice on regular professional maintenance for performance.
Diagnose faults using codes displayed on the remote controller.
Interpret LED lights on the outdoor unit PCB for fault diagnosis.
