EasyManua.ls Logo

Daikin FTXS35KVM Service Manual

Daikin FTXS35KVM
25 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
REMOVAL
PROCEDURE
SERVICE MANUAL
Indoor Unit
Inverter / Non-Inverter
Wall Mounted Type
2.0/2.5/3.5 kW Class
9000/13000 Btu/h Class
Si041251EC
Question and Answer IconNeed help?

Do you have a question about the Daikin FTXS35KVM and is the answer not in the manual?

Daikin FTXS35KVM Specifications

General IconGeneral
BrandDaikin
ModelFTXS35KVM
CategoryAir Conditioner
LanguageEnglish

Summary

Electrical Box Removal

Remove Wire Fixture Screw

Removing the screw securing the wire fixture.

Disconnect Terminal Board Wires

Removing terminal board screws and disconnecting wires.

Disconnect Connector [S6]

Procedure for disconnecting the S6 connector.

Disconnect Connector [S7]

Procedure for disconnecting the S7 connector.

Remove Drip Proof Plate

Removing the drip proof plate after unfastening screws.

Pull Out Heat Exchanger Thermistor

Procedure to pull out the indoor heat exchanger thermistor.

Detach Earth/Ground Wire

Removing the screw and detaching the earth/ground wire.

Remove Electrical Box Screw

Removing the screw that secures the electrical box.

Lift and Pull Electrical Box

Lifting and pulling the electrical box for removal.

Release Top Rear Hook

Unfastening the top rear hook by pressing from above.

Disconnect [S1] and Remove Box

Disconnecting connector S1 and removing the electrical box.

PCBs Removal

Remove Shield Plate

Procedure for removing the shield plate.

Release Thermistor and Ground Wire

Releasing heat exchanger thermistor and ground wire from hooks.

Remove Terminal Board

Removing the terminal board by unfastening screws.

Remove Signal Receiver Unit

Unfastening hooks and removing the signal receiver unit.

Fan Motor Removal

Indoor Heat Exchanger Removal

Fan Rotor Removal

Related product manuals