Why my Daikin FTXS35K3V1B Air Conditioner does not operate?
If your Daikin Air Conditioner isn't turning on and the operation lamp is off, check a few things: * Make sure a breaker hasn’t turned off or a fuse hasn’t blown. * Confirm there isn’t a power failure. * Check if batteries are properly set in the remote controller. * Ensure the timer setting is correct.
What to do if Daikin FTXS35K3V1B Air Conditioner operation stopped suddenly?
If your Daikin Air Conditioner suddenly stopped and the OPERATION lamp is flashing, try these steps: * Clean the air filters. * Ensure nothing is blocking the air inlet or outlet of the indoor and outdoor units. * Turn the breaker off, remove any obstacles, and turn it back on. Try operating the air conditioner with the remote controller. If the lamp continues to flash, contact your service shop. * If it's a multi-system, ensure all indoor units are set to the same operation mode.
Why does my Daikin Air Conditioner indoor unit give out odour?
If your Daikin Air Conditioner's indoor unit is emitting an odor, it's likely due to smells from the room, furniture, or cigarettes being absorbed into the unit and released with the airflow. Consider having the indoor unit professionally cleaned.
How to fix Daikin FTXS35K3V1B remote controller that does not work properly?
If your Daikin Air Conditioner remote controller isn't working well, the batteries may be weak or the remote may be malfunctioning. Replace all batteries with new, size AAA.LR03 (alkaline) batteries.
Why does Daikin FTXS35K3V1B Air Conditioner outdoor unit emit water or steam during HEAT operation?
The water or steam coming from the outdoor unit of your Daikin Air Conditioner during HEAT operation is due to the frost on the outdoor unit melting during defrost operation.
Why does Daikin Air Conditioner outdoor unit emit water or steam during COOL or DRY operation?
If your Daikin Air Conditioner's outdoor unit is emitting water or steam during COOL or DRY operation, it's likely due to moisture in the air condensing on the cool surface of the outdoor unit piping.
Why hot air does not flow out soon after the start of HEAT operation of Daikin FTXS35K3V1B?
If hot air doesn't flow out soon after starting HEAT operation on your Daikin Air Conditioner, it's because the unit is warming up. Please wait for 1 to 4 minutes.
What to do if an abnormality occurs during Daikin FTXS35K3V1B operation?
Consult the service shop where you bought the air conditioner.
How to improve cooling (heating) effect of Daikin FTXS35K3V1B?
If your Daikin Air Conditioner isn't cooling or heating effectively, consider the following: * Ensure the air filters are clean. * Check for obstructions blocking the air inlet or outlet of the indoor and outdoor units. * Verify the temperature setting is appropriate. * Confirm that windows and doors are closed. * Make sure the airflow rate and direction are set appropriately.
Why is there a sound heard during Daikin FTXS35K3V1B operation?
A sound during the operation of your Daikin Air Conditioner could be due to a few reasons: * The sound may be generated by the refrigerant flowing through the system. * It could be the pumping sound of water being drained during cooling or drying operation. * Refrigerant may flow even when the unit is off if other indoor units are running.
General| Brand | Daikin |
|---|---|
| Model | FTXS35K3V1B |
| Category | Air Conditioner |
| Language | English |
Instructions to prevent personal injury or loss of life.
Instructions to prevent property damage or injury.
Further precautions for safe operation and installation.
Step-by-step guide to set the current time and day.
How to select and start an operation mode.
How to adjust the temperature using the remote controller.
How to activate automatic airflow direction movement.
Steps to change the fan speed setting.
Warning against forcing flap movement manually.
How airflow is directed for comfort in COOL/HEAT modes.
Sensor detects human movement for energy saving.
Using COMFORT AIRFLOW and INTELLIGENT EYE together.
How to activate these modes using the remote controller.
How to turn off the INTELLIGENT EYE lamp.
Details of COMFORT AIRFLOW, INTELLIGENT EYE, and combined modes.
Explains flap movement and limitations with other functions.
Covers application range, detection factors, and conflicts.
Details airflow rate and flap behavior in combined modes.
Warning about placing objects near the sensor or hitting it.
How to activate the mode for maximum cooling/heating.
Explains limitations and effects in different modes.
Limits maximum power consumption for efficiency.
Lowers outdoor unit noise, convenient for nighttime.
How to select and activate these modes.
Explains when ECONO is effective and its limitations.
Step-by-step guide to set the timer to switch off.
Step-by-step guide to set the timer to switch on.
How to set timer settings for each day of the week.
How to start setting the weekly timer programs.
How to set the ON/OFF mode, time, and temperature.
How to set the specific time for timer events.
How to set the target temperature for each timer event.
Safety warnings before performing cleaning.
Checks for power, batteries, and timer settings.
Checks filters, obstructions, and matching modes.
Checks filters, airflow, settings, and room conditions.
Actions for burning smells, continued abnormal operation.
List of critical issues like hot power cord, abnormal sound, breaker trips.
How to enter diagnosis mode on the remote controller.
List of error codes (CODE) and their meanings (MEANING).
To Next Page
