19
ECONO/OUTDOOR UNIT
QUIET Operation
■
ECONO operation
ECONO operation is a function which enables efcient operation by limiting the maximum power
consumption value.
This function is useful for cases in which attention should be paid to ensure a circuit breaker will not trip
when the product runs alongside other appliances.
[Example]
Normal operation ECONO operation
• In case the air conditioner and other appliances which
require high power consumption are used at same time, a
circuit breaker may trip if the air conditioner operate with
its maximum capacity.
•
The maximum power consumption of the air conditioner is
limited by using ECONO operation.
The circuit breaker will hardly trip even if the air
conditioner and other appliances are used at same time.
Time
Maximum during normal operation
Maximum during ECONO operation
Normal
operation
ECONO
operation
From start up until set temperature is reached
Running current and power consumption
• This diagram is a representation for illustrative purposes
only.
The maximum running current and power consumption of
the air conditioner in ECONO operation vary with the
connecting outdoor unit.
■
OUTDOOR UNIT QUIET operation
OUTDOOR UNIT QUIET operation lowers the noise level of the outdoor unit by changing the frequency and fan speed on the out-
door unit. This function is convenient during the night.
[Example] Using the OUTDOOR UNIT QUIET operation during the night.
• The noise level of the
outdoor unit will be lower.
This function is useful
when you need to
consider the noise for
your neighbourhood.
To Next Page
Loading...
