33
Care and Cleaning
CAUTION
• Do not touch the aluminium ns by bare hand at the time of dismounting or mounting the lter.
1. Pull out the air lters.
• Open the front panel.
• Push a little upwards the lter tab at the center of
each air lter, then pull it down.
2) Pull down
1) Push
2. Wash the air lters with
water or clean them with
vacuum cleaner.
• Be sure to remove the titanium apatite
photocatalytic air-purifying lter. Refer to titanium
apatite photocatalytic air-purifying lter on the
next page.
• It is recommended to clean the air lters every
2 weeks.
If the dust does not come off easily
• Wash the air lters with neutral detergent thinned with
lukewarm water, then dry them up in the shade.
3. Set the lters as they were
and close the front panel.
• Press the front panel at both sides and the
center.
■
Air lter