Why does mist come out of the Daikin FTXS35K3V1B Air Conditioner indoor unit?
Mist coming from the indoor unit of your Daikin Air Conditioner can occur because the air in the room is cooled into mist by the cold airflow during COOL operation, or because the air in the room is cooled by the heat exchanger and becomes mist during defrost operation.
How to fix Daikin FTXS35K3V1B Air Conditioner ON/OFF TIMER that does not operate according to the settings?
If the ON/OFF TIMER on your Daikin Air Conditioner isn't working as set, check if the ON/OFF TIMER and the WEEKLY TIMER are set to the same time. Change or deactivate the settings in the WEEKLY TIMER.
What to do if Daikin Air Conditioner has an abnormal functioning during operation?
If your Daikin Air Conditioner is malfunctioning during operation, it may be due to lightning or radio waves. Turn the breaker off, then turn it back on, and try operating the air conditioner with the remote controller.
Why Daikin FTXS35K3V1B flaps do not start swing immediately?
If the flaps on your Daikin Air Conditioner don't start swinging immediately, it's because the air conditioner is adjusting their position. They will start moving soon.
General| Brand | Daikin |
|---|---|
| Model | FTXS35K3V1B |
| Category | Air Conditioner |
| Language | English |
Instructions to prevent personal injury or loss of life.
Instructions to prevent property damage or injury.
Further precautions for safe operation and installation.
Step-by-step guide to set the current time and day.
How to select and start an operation mode.
How to adjust the temperature using the remote controller.
How to activate automatic airflow direction movement.
Steps to change the fan speed setting.
Warning against forcing flap movement manually.
How airflow is directed for comfort in COOL/HEAT modes.
Sensor detects human movement for energy saving.
Using COMFORT AIRFLOW and INTELLIGENT EYE together.
How to activate these modes using the remote controller.
How to turn off the INTELLIGENT EYE lamp.
Details of COMFORT AIRFLOW, INTELLIGENT EYE, and combined modes.
Explains flap movement and limitations with other functions.
Covers application range, detection factors, and conflicts.
Details airflow rate and flap behavior in combined modes.
Warning about placing objects near the sensor or hitting it.
How to activate the mode for maximum cooling/heating.
Explains limitations and effects in different modes.
Limits maximum power consumption for efficiency.
Lowers outdoor unit noise, convenient for nighttime.
How to select and activate these modes.
Explains when ECONO is effective and its limitations.
Step-by-step guide to set the timer to switch off.
Step-by-step guide to set the timer to switch on.
How to set timer settings for each day of the week.
How to start setting the weekly timer programs.
How to set the ON/OFF mode, time, and temperature.
How to set the specific time for timer events.
How to set the target temperature for each timer event.
Safety warnings before performing cleaning.
Checks for power, batteries, and timer settings.
Checks filters, obstructions, and matching modes.
Checks filters, airflow, settings, and room conditions.
Actions for burning smells, continued abnormal operation.
List of critical issues like hot power cord, abnormal sound, breaker trips.
How to enter diagnosis mode on the remote controller.
List of error codes (CODE) and their meanings (MEANING).
To Next Page
