Daikin FTXS35K3V1B - Initial Setup and Clock Setting; Setting the Internal Clock

10
NOTE
■
Note on setting the clock
• If the indoor unit’s internal clock is not set to the correct time, the ON TIMER, OFF TIMER and WEEKLY TIMER will not operate punctually.
■
Turn the breaker on
• After the power is turned on, the aps of the indoor unit opens and closes once to set
the reference position.
■
To set the clock
1. Press .
• “ ” is displayed on the LCD.
• “ ” and “ ” blink.
2. Press to set the current day of the week.
3. Press .
• “ ” blinks.
4. Press to set the clock to the present time.
• Holding down or rapidly increases or decreases the time display.
5. Press .
• Point the remote controller at the indoor unit when pressing the buttons.
• “ ” blinks.