Need help?Do you have a question about the Daikin FXLQ20P2VEB and is the answer not in the manual?
General| Model | FXLQ20P2VEB |
|---|---|
| Category | Air Conditioner |
| Cooling Capacity | 2.2 kW |
| Heating Capacity | 2.5 kW |
| Energy Efficiency Ratio (Cooling) | 3.21 |
| Coefficient of Performance (Heating) | 3.61 |
| Indoor Unit Dimensions (WxHxD) | 700 x 200 x 620 mm |
| Airflow Rate | 8.5 m³/min |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R410A |
Inspect unit on delivery, unpack carefully, and handle safely.
Precautions for R410A, unit placement, and environmental considerations.
Safety measures for installation, including electrical and child safety.
List of standard and optional accessories for unit installation.
Information on R410A refrigerant, GWP, and leak inspection.
Conditions for choosing an installation location for optimal performance and access.
Steps and precautions for securely mounting the unit on a wall.
Steps and precautions for installing the unit on the floor.
Use of approved piping, insulation for leak prevention, and heat resistance.
Proper flare nut tightening torque and preparation for leak-free connections.
Requirements for licensed technicians, pipe handling, and leak detection procedures.
Procedures for brazing with nitrogen, filler alloys, and flux usage.
Proper drain pipe installation, slope, and checks for smooth drainage.
Avoiding corrosive connections and preventing drain pipe blockages.
Safety warnings, dedicated power supply, authorized electricians, and wire types.
Procedures for connecting wires to terminals and recommended tightening torques.
Guidelines for multi-unit wiring, grounding, wire separation, and electrical noise.
Details on electrical characteristics, fuses, and wire sizing.
Connecting power, remote, and transmission wiring to the control box and unit.
Examples of wiring for various system setups (single, group, BS unit).
Configuring the remote controller for specific installation conditions.
Wiring and setting for external forced off and on/off operations.
Guide to understanding remote controller error codes for troubleshooting.
Instructions for cleaning the air filter, including frequency and methods.
Procedures for cleaning air outlets, panels, and drain strainers.
Steps for starting up after a long stop and shutting down for extended periods.
Key for understanding wiring diagram symbols, colors, and components.
Important notes on using copper conductors and remote controller connections.
To Next Page
