Need help?Do you have a question about the Daikin FXLQ25P2VEB and is the answer not in the manual?
General| Brand | Daikin |
|---|---|
| Model | FXLQ25P2VEB |
| Category | Air Conditioner |
| Language | English |
Details about R410A refrigerant and GWP.
Criteria for choosing a suitable location for the unit.
Warnings about improper installation, electrical shock, and environmental factors.
Explains the model codes for FXLQ and FXNQ units.
Lists the parts included with the unit.
Describes available optional accessories like remote controllers.
Important guidance for installers regarding proper installation.
Procedures and considerations for mounting the unit on a wall.
Procedures and considerations for placing the unit on the floor.
Details on using copper pipes, insulation, and tightening torques.
Instructions for tightening flare nuts and relevant dimensions.
Guidance on connecting and sloping the drain hose.
Precautions for connecting drain pipes to avoid corrosion and blockages.
Safety warnings and general guidelines for electrical wiring.
Details on connecting wires to terminal blocks with correct torque.
Connecting wires to the control box and terminal blocks.
Instructions for mounting the remote controller on the unit.
Illustrations of different wiring configurations for systems.
Configuring the remote controller based on installation conditions.
Setup for controlling one indoor unit with two remote controllers.
Setup for forced off and on/off operations via external input.
Procedure for checking the unit's operation and identifying errors.
Instructions for cleaning the air filter and resetting the indicator.
Methods for cleaning the unit's exterior and air outlets.
Procedure for cleaning the drain strainer to prevent clogging.
Steps for preparing the unit after a period of non-operation.
Instructions on how to properly shut down the system for long storage.
Schematic representation of electrical connections and components.
Guidelines for the proper dismantling and disposal of the unit.
To Next Page
