English 4
1. Press the FILTER SIGN RESET BUTTON of the
remote controller after the air filter is cleaned and
attached.
The “ ” (TIME TO CLEAN AIR FILTER) display turns
OFF.
Refer to the operation manual provided with the outdoor
unit for the positions of the “ ” (TIME TO CLEAN AIR
FILTER) display and FILTER SIGN RESET BUTTON.
HOW TO CLEAN AIR OUTLET AND OUTSIDE
PANELS (Field supply)
1. Clean with soft cloth.
2. When it is difficult to remove stains, use water or
neutral detergent.
NOTES
• Do not use gasoline, benzene, thinner, polishing powder,
liquid insecticide. It may cause discoloring or warping.
• Do not let the indoor unit get wet. It may cause an electric
shock or a fire.
• Do not use hot water of 50°C or higher, as doing so may
result in discoloration or deformation.
To Next Page
Loading...
