Daikin hydrocube EWWQ-KC - Options and Features

D-EIMHP01501-22_01EN 5/20
1.1 Options and features
Options
• BMS-connection optional connectivity kit card:
- MODBUS TCP/IP
- BACNET MSTP
- BACNET TCP/IP
• Remote user interface
• Low noise operation kit (field installed)
• Entering water temperature kit
• Master/slave water temperature kit
• Modem for Daikin On Site
Standard features
• Glycol application for chilled water temperature down to –10°C.
• Powered Contact
• General alarm
• Voltage free digital contacts
- general operation
- Reversing Valve
- Evaporator Water pump
- Condenser Water pump
- Backup heater
• Changeable remote inputs
- remote start/stop
- remote cooling/heating
- dual setpoint
- External Alarm
- Setpoint reset
(1) Refer to the operation manual, Wiring diagram, or engineering data book for the complete list of specifications,
options, and features.