Why is my Daikin Air Conditioner cooling (heating) effect poor?
Several factors can cause a poor cooling or heating effect. Check if the air filters are clean and ensure that nothing is blocking the air inlet or outlet of either the indoor or outdoor units. Also, verify that the temperature setting is appropriate, and that all windows and doors are closed. Finally, make sure the airflow rate and direction are set correctly.
How to fix Daikin Inverter FTXS85LVMA Air Conditioner ON/OFF TIMER that is not operating according to the settings?
Check if the ON/OFF TIMER and the WEEKLY TIMER are set to the same time.
What to do if my Daikin Inverter FTXS85LVMA Air Conditioner operation stopped suddenly?
If the OPERATION lamp is flashing, first ensure the air filters are clean. If not, clean them. Check for any obstructions blocking the air inlet or outlet of the indoor and outdoor units; if present, turn off the breaker, remove the obstacles, and then turn the breaker back on. If you are using a multi system, ensure all indoor units are set to the same operation mode. If issues persist, set all indoor unit operation modes to “COOL” or “HEAT” for a moment and check again that the lamps are normal. If the lamps stop flashing after the above steps, there is.
What to do if my Daikin Inverter FTXS85LVMA does not operate?
If the OPERATION lamp is off, check the following: ensure that a breaker hasn’t turned off or a fuse hasn’t blown, verify that there isn’t a power failure, confirm that batteries are correctly installed in the remote controller, and ensure the timer setting is correct.
How to fix Daikin Air Conditioner remote controller that is not working properly?
If the remote controller isn't working, it may be due to dying batteries or a malfunction. Replace all the batteries with new, size AAA.LR03 (alkaline) batteries.
Why does hot air not flow out soon after starting heating operation on my Daikin Inverter FTXS85LVMA Air Conditioner?
The air conditioner is warming up. Allow 1 to 4 minutes for hot air to begin flowing.
Why does mist come out of my Daikin Inverter FTXS85LVMA Air Conditioner indoor unit?
Mist may appear from the indoor unit because the air in the room is cooled into mist by the cold airflow during COOL operation. It can also occur because the air in the room is cooled by the heat exchanger and becomes mist during defrosting operation.
What to do if my Daikin Inverter FTXS85LVMA Air Conditioner has an abnormal functioning during operation?
The air conditioner may malfunction due to lightning or radio waves. To resolve this, turn the breaker off, then turn it back on, and try operating the air conditioner with the remote controller.
Why does the outdoor fan rotate when my Daikin Air Conditioner is not in operation?
The outdoor fan may continue rotating for up to 60 seconds after the air conditioner stops to protect the system. Additionally, when the outdoor temperature is very high, the outdoor fan may start rotating for system protection.
Why does my Daikin Inverter FTXS85LVMA Air Conditioner operation not start soon?
You should wait for about 3 minutes.
Detects human movement for automatic energy saving operation.
Enables setting up to 4 daily timers for personalized scheduling.
Directs airflow for optimal comfort in COOL or HEAT modes.
Reduces outdoor unit noise for quieter operation.
Essential warnings and cautions to prevent injury, fire, and property damage.
Precautions regarding unit operation, electrical safety, and environmental hazards.
Guidelines for safe installation, handling, and usage of the unit.
Identification and description of the indoor unit's main components and sensors.
Identification of the outdoor unit's components and connections.
Details of the remote control's signal transmitter, display, and basic buttons.
Explains the functions of various buttons for mode selection, airflow, and timers.
Instructions for inserting batteries and mounting the remote controller holder.
Guide to setting the internal clock for accurate timer functions.
How to start and stop the unit using different operation modes like AUTO, COOL, HEAT.
Steps to change the desired temperature for cooling and heating operations.
Setting airflow direction for auto swing, 3D airflow, and desired positions.
Selecting desired airflow speed and understanding quiet operation.
Optimizes airflow direction for user comfort in COOL/HEAT modes.
Automatically adjusts operation based on room occupancy for energy savings.
Using both features simultaneously and managing their priority.
Temporarily maximizes cooling or heating output for quick comfort.
Reduces the noise level of the outdoor unit for quieter neighborhood.
Limits power consumption to ensure efficient operation and prevent breaker trips.
Setting the unit to automatically turn off at a specified time.
Setting the unit to automatically turn on at a specified time.
Setting up to four timer programs per day for a week.
Step-by-step guide to define daily schedules for the weekly timer.
Copying programmed settings to other days for efficient scheduling.
Checking current timer reservations and disabling the weekly timer.
Removing individual or all programmed timer settings.
Managing operation modes across multiple indoor units connected to one outdoor unit.
How priority rooms influence operations and the function of mode locks.
Overview of parts to clean and general cleaning notes.
Detailed steps for removing, cleaning, and reattaching the front panel.
Instructions for removing, washing, and maintaining the unit's air filters.
Guide to cleaning or replacing the titanium apatite photocatalytic air-purifying filter.
Steps for storing the unit during extended periods of non-use.
Explains common sounds during operation and their causes.
Addresses issues like unit not operating, sudden stops, and poor heating effect.
Troubleshooting poor cooling/heating, remote control malfunctions, and unit odors.
Symptoms requiring professional service and warnings against self-repair.
Guide to interpreting error codes displayed by the remote controller.
General| Type | Inverter |
|---|---|
| Cooling Capacity | 8.5 kW |
| Heating Capacity | 9.5 kW |
| Seasonal Energy Efficiency Ratio (SEER) | 6.1 |
| Power Supply | 220-240V, 50Hz |
| Indoor Unit Dimensions (W x H x D) | 1100 x 300 x 240 mm |
| Outdoor Unit Dimensions (W x H x D) | 800 x 550 x 330 mm |
| Weight (Indoor Unit) | 12 kg |
| Weight (Outdoor Unit) | 42 kg |
| Capacity | 8.5 kW |
| Refrigerant | R32 |
To Next Page