Daikin MC30VVM-H - Features; PM2.5 Particle Control; PM2.5 Sensor and Air Quality Indicator; 3-Stage Air Filtration System

FEATURES
1. Controlling PM2.5
2. PM2.5 sensor and air quality indicator
Equipped with PM2.5 sensor enables quick detection of
ultrane particles, easy display and smart operation.
DUST indicator : Large house dust (approx.2.5μm and above)
PM2.5 indicator : Ultrane particles (approx. 2.5μm and smaller)
3. Powerful suction in three directions
Bottom suction is close to oor so it can take in harmful
substances close to the oor.
4. 3-stage ltration system
3-stage ltration system of pre-lter, deodorising lter
and dust collection lter(electrostatic HEPA lter) ensures
thorough and rapid purication.
Elimination of 99% of 0.1-2.5μm particles (*1).
• Does not take into account inow of new particles from outdoors owing to
ventilation etc.
• PM2.5 is a generic term for particulate matter that is 2.5μm or less in size.
• Elimination of particulate matter that is less than 0.1μm in size by this air purier
has not been veried.
This product cannot eliminate all airborne toxic substances.
(*1) Test methodology: The Japan Electrical Manufacturers’ Association standard
(JEM1467)
Decision criteria: Elimination of 99% of 0.1-2.5μm particulate matter in a 32m³
airtight space in 90 minutes or less. Equivalent value for 32m³ test space.
These results were obtained in a 32m³ airtight space. They are not
demonstrable eects in customer environments.