Need help?Do you have a question about the Daikin MC70LPVM and is the answer not in the manual?
General| Model | MC70LPVM |
|---|---|
| Type | Air Cleaner |
| Coverage Area | Up to 70 m² |
| Airflow Rate (max) | 420 m³/h |
| Operating Modes | Auto, Manual, Sleep |
| Application Area | Residential |
| Filter Type | HEPA, Carbon |
Explains the powerful suction and airflow rate for capturing dust and pollen.
Details the streamer discharge process for odour decomposition and recovery.
Essential safety guidelines for handling the air purifier and its components.
Identifies and explains the various parts and controls of the air purifier.
Steps and checks required before using the air purifier for the first time.
Instructions on starting, stopping, and basic operation of the air purifier.
Important warnings and guidelines regarding the power cord and plug safety.
Key safety instructions for the main body of the air purifier, including environmental hazards.
Additional cautionary advice for operating the main unit in various environments and conditions.
Specific cautions related to the power cord, plug, and electrical connections.
Precautions for the main unit regarding air currents, water, and physical contact.
General safety measures and warnings for using the air purifier with pets or chemicals.
Explanation of the control panel display, indicators, and buttons.
Details of air inlets for sensors and the main air outlet.
Identification and purpose of key internal parts like filters and ionisers.
Warning about the safety guard and potential injury from removing it.
Overview of the remote controller buttons and their operations.
Explanation of various indicator lamps for unit status and modes.
Three-color indicator showing air cleanliness levels (green, yellow, red).
Explanation of additional indicator lamps for unit status and modes.
Indicates when the filter needs replacement or units require cleaning.
Three-color indicator showing different odour levels (green, yellow, red).
Ensures all included accessories are present before initial setup.
Step-by-step guide for correctly installing the pleated filter.
Instructions for removing the front panel, UNIT1, and deodorising catalyst unit.
Instructions for reattaching the front panel, UNIT1, and deodorising catalyst unit.
Detailed instructions for fitting the prefilter and pleated filter correctly.
Guidelines for optimal placement and spacing of the air purifier.
Tips for positioning the unit based on room type and air quality needs.
List of locations and environments where the unit should not be operated.
Steps for replacing the battery in the remote controller.
Instructions on operating the remote controller and its transmission range.
Instructions for turning the unit on and off.
How to engage and disengage the childproof lock feature.
Using the auto fan mode for automatic air quality adjustment.
How to activate turbo mode for maximum air purification.
Instructions for setting the automatic shut-off timer.
Adjusting the fan speed manually through various settings.
How to use the anti-pollen mode for effective pollen removal.
Using the sleep mode for low-noise operation.
Adjusting the intensity of the unit's indicator lamps.
Cleaning instructions for the front panel of the air purifier.
Maintenance guidelines for the prefilter, including vacuuming and washing.
Cleaning procedure for UNIT1 when the 'UNIT1' lamp lights up.
Cleaning procedure for UNIT2 when the 'UNIT2' lamp lights up.
Instructions for replacing the pleated filter when the filter lamp indicates.
Maintenance for the deodorising catalyst unit, including vacuuming.
Cleaning the air inlets and the main unit to prevent dust accumulation.
Steps to remove the front panel, prefilter, UNIT1, and deodorising catalyst unit.
Instructions for reattaching the front panel, prefilter, UNIT1, and deodorising catalyst unit.
Procedure for detaching the opposing pole plates from UNIT1.
Instructions for correctly fitting the opposing pole plates onto the ionising frame.
Steps to reattach UNIT1 and the front panel after maintenance.
Detailed cleaning process for UNIT1, including soaking and drying.
Detailed cleaning process for UNIT2, including soaking and drying.
Cleaning instructions for the ionising frame and ionised wires.
Cleaning procedure for the opposing pole plates.
Specific cleaning instructions for the streamer unit, including needles.
Detailed procedure for removing the old filter and installing a new one.
Instructions for reattaching UNIT1 and the front panel after filter replacement.
Connecting the power plug and resetting the filter lamp.
How to adjust the dust sensor sensitivity using the unit's controls.
Procedure for increasing the dust sensor's responsiveness to particles.
Procedure for decreasing the dust sensor's responsiveness to particles.
Addresses washing the deodorising catalyst unit and potential replacement.
Troubleshooting steps when the dust sensor is not detecting effectively.
Guidance on actions to take if the ionised wires are damaged.
Troubleshooting common issues indicated by indicator lamps on the unit.
Steps to check when the unit fails to power on.
Diagnosing and resolving issues where the air purification is ineffective.
Troubleshooting the odour sensor lamp indication when odour is present.
Investigating and addressing odours emitted from the unit.
Troubleshooting common sounds like crackling, buzzing, or fizzing.
Resolving issues indicated by blinking or lit indicator lamps.
Troubleshooting why UNIT lamps remain lit after cleaning.
Resolving the filter lamp issue after replacing the filter.
Addressing other issues like burn marks, distorted TV pictures, or electrical interference.
To Next Page
