Need help?Do you have a question about the Daikin RXL25M2V1B and is the answer not in the manual?
General| Category | Air Conditioner |
|---|---|
| Model | RXL25M2V1B |
| Cooling Capacity | 2.5 kW |
| Heating Capacity | 3.2 kW |
| Refrigerant | R32 |
| Type | Split |
| Power Supply | 220-240V, 50Hz |
| Energy Efficiency Ratio (Heating) | 4.0 |
| Indoor Unit Noise Level | 19 dB |
Lists standards like EN60335-2-40 and directives for EMC and Low Voltage.
Explains the meaning of WARNING and CAUTION labels for user safety.
Covers essential safety steps during installation, like using qualified personnel and proper wiring.
Provides criteria for choosing a suitable installation site, including noise, airflow, and environmental factors.
Highlights installation limitations and specific warnings for low ambient temperatures.
Details maximum/minimum piping lengths, height, and additional refrigerant requirements.
Specifies required clearances around the outdoor unit for airflow and servicing.
Instructions on how to remove and attach the stop valve cover.
Specifies clearances around the unit based on surrounding walls for optimal airflow.
Details on ensuring a stable foundation and securely fastening the unit to prevent vibration.
Step-by-step guide on how to properly flare the end of refrigerant pipes.
Instructions on applying oil and tightening flare nuts with specified torque values.
Important warnings regarding refrigerant use, recovery, and vacuum pump compatibility.
Detailed steps for removing air from the system and performing a gas leak check.
Instructions on how to properly fill the system with R410A refrigerant.
Guidelines for handling refrigerant pipes and selecting appropriate heat insulation materials.
Step-by-step guide to pump down the unit for relocation or disposal.
How to activate and use the forced cooling operation mode.
Key safety warnings and precautions to follow during electrical wiring.
Instructions for connecting indoor/outdoor units and the main power supply.
Explains symbols used in the wiring diagram and their meanings.
Lists and defines the various components shown in the wiring diagram.
Steps to perform a trial operation and initial testing of the unit.
A checklist of items to verify for proper installation and function.
To Next Page