Need help?Do you have a question about the Daikin RXP50K3V1B and is the answer not in the manual?
General| Category | Air Conditioner |
|---|---|
| Model | RXP50K3V1B |
| Type | Split System |
| Cooling Capacity | 5.0 kW |
| Energy Efficiency Ratio (EER) | 3.21 |
| Refrigerant | R32 |
| Outdoor Unit Noise Level | 48 dB(A) |
| Power Supply | 220-240V, 50Hz |
Important safety instructions, including warnings and cautions for safe operation.
Explains the meaning of WARNING and CAUTION notices for user safety.
Explains the meaning of safety marks used throughout the manual for user guidance.
Precautions for electrical work, including wiring, grounding, and breaker usage.
Safety measures for handling refrigerant gas, including leaks and ventilation.
Cautions for installing the outdoor unit, including placement and environmental factors.
Lists accessories supplied with the outdoor unit, such as manuals and labels.
Specifies the operational temperature and humidity ranges for effective and safe cooling/heating.
Outlines the temperature setting ranges for the remote controller in different modes.
Guidelines for choosing a suitable installation location for the outdoor unit, considering noise and airflow.
Cautions regarding outdoor unit placement, especially concerning wind and snow exposure.
Details on maximum allowable piping length, height, and additional refrigerant.
Specifies required clearances around the outdoor unit for installation and servicing.
Notes on installation compliance, piping stress, and securing components.
Guidelines for positioning the outdoor unit relative to walls or obstacles affecting airflow.
Checks for installation ground strength, levelness, and secure fixing with foundation bolts.
Refers to location selection and drawings for installing the outdoor unit.
Procedures for drain plug usage, foot base adjustment, and avoiding freezing in cold areas.
Steps for preparing the pipe end, including cutting, deburring, and flaring for connections.
Guidance on using correct flare nuts, refrigeration oil, and torque wrenches for piping connections.
Procedures for purging air from refrigerant pipes and checking for gas leaks using a vacuum pump.
Guidelines on vacuum pump run time based on pipe length for effective vacuuming.
Instructions on refilling refrigerant, including type, amount, and labeling requirements.
Cautions on handling pipes, selecting materials, and insulating gas/liquid pipes.
Illustrates the refrigerant flow and component layout for the specified models.
Steps for pump down operation to remove refrigerant before relocation or disposal.
Warning about pump down procedures when a refrigeration circuit leak is detected.
Caution regarding touching the terminal block due to high voltage during operations.
Explanation of the facility setting for low outdoor temperature operation and jumper configuration.
Warnings about using incorrect wires, parts, breakers, and connecting power to the indoor unit.
Precautions for power supply wiring, including wire stripping, terminals, and connections.
Legend explaining symbols and abbreviations used in the wiring diagrams.
Steps for conducting trial operation in cooling or heating mode, including temperature settings.
A checklist of test items for installation verification and their corresponding symptoms.
To Next Page