EasyManua.ls Logo

Daikin RXR50EV1B9 User Manual

Daikin RXR50EV1B9
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
REMOVAL
PROCEDURE
SERVICE MANUAL
2.8/4.2/5.0 kW Class
Outdoor Unit
Inverter
Pair Type
Si00-777

Other manuals for Daikin RXR50EV1B9

Question and Answer IconNeed help?

Do you have a question about the Daikin RXR50EV1B9 and is the answer not in the manual?

Daikin RXR50EV1B9 Specifications

General IconGeneral
ModelRXR50EV1B9
CategoryAir Conditioner
TypeSplit System
Cooling Capacity5.0 kW
Heating Capacity6.0 kW
RefrigerantR32
Power Supply220-240V, 50Hz

Summary

Removal of Humidifier Unit

Remove the Humidifier Unit

Disconnecting relay harnesses and physically removing the humidifier unit.

Removal of Heater Assembly, Humidifying Rotor, and Humidifying Rotor Motor

Remove the Heater Assembly

Steps to remove the heater assembly after unscrewing the duct.

Remove the Humidifying Rotor

Steps to remove the humidifying rotor.

Remove the Humidifying Rotor Motor

Procedure to remove the humidifying rotor motor.

Removal of Humidifying Fan Assembly

Remove Humidifying Fan Assembly

Procedure to remove the humidifying fan assembly via tape and screws.

Remove the Damper Assembly

Procedure for removing the damper assembly.

Removal of Hygroscopic Fan Motor

Remove Hygroscopic Fan Motor

Procedure to detach and remove the hygroscopic fan motor.

Removal of Outdoor Fan and Fan Motor

Remove Front Panel

Procedure to remove the front panel by unscrewing and unfastening hooks.

Remove Outdoor Fan

Procedure to remove the outdoor fan by unscrewing the nut.

Removal of Electrical Box

Removal of PCB

Removal of Sound Blankets

Removal of Reactor and Partition Plate

Removal of Four Way Valve

Four Way Valve Brazed Part Disconnection

Procedure for heating and disconnecting the brazed parts of the four way valve.

Removal of Electronic Expansion Valve

Electronic Expansion Valve Coil and Brazed Part Disconnection

Procedure to pull out the EEV coil and disconnect its brazed parts.

Removal of Compressor

Compressor Brazed Part Disconnection and Removal

Heating and disconnecting brazed parts, then removing the compressor.

Related product manuals