To Next PageTo Next Page
Need help?Do you have a question about the Daikin RXY14MTL and is the answer not in the manual?
General| Type | Inverter |
|---|---|
| Cooling Capacity | 14.0 kW |
| Heating Capacity | 16.0 kW |
| Refrigerant | R410A |
| Power Supply | 3 Phase, 380-415 V, 50 Hz |
Lists critical actions to avoid for safe operation and unit protection.
Explains various icons and information shown on the remote controller screen.
Details the function of each button and switch on the remote controller.
Outlines steps for basic cooling, heating, and fan-only modes.
Explains how to use the program dry mode to decrease room humidity.
Provides instructions on how to adjust the air flow direction.
Details how to set the system's start and stop times using the timer function.
Explains how to designate a master remote controller in multi-unit systems.
Addresses issues where the air conditioner fails to start or respond.
Explains why cool/heat mode might not be selectable on the remote.
Troubleshoots situations where fan mode works but heating/cooling does not.
Addresses fan speed issues during operation or when room temperature is met.
Explains when fan direction may not match remote control display or swing.
Explains conditions causing white mist from indoor or outdoor units.
Describes normal operating sounds from indoor and outdoor units.
Explains why dust may be emitted from the unit upon first use or during operation.
Discusses how units can absorb and emit room odors.
Addresses the outdoor unit fan speed control during operation.
Explains the display indication after the main power switch is turned on.
Explains why the compressor might not stop immediately after short heating.
Explains why the outdoor unit remains warm after stopping due to the crankcase heater.
Guides for troubleshooting general system operation issues like power or fuses.
Troubleshoots why the system stops immediately after starting heating or cooling.
Provides checks for insufficient cooling or heating, including airflow and settings.
