Why is my Daikin RXYQ12PY1 system not operating at all?
If your Daikin Heat Pump system isn't operating, consider these potential causes: a power failure (wait until power is restored), a blown fuse (turn off the power supply), or a blown breaker (turn the power on with the ON breaker switch in the off position).
Why is my Daikin RXYQ12PY1 system operating but cooling or heating is insufficient?
There could be several reasons why your Daikin Heat Pump isn't cooling or heating sufficiently: * Check if the air inlet or outlet of the outdoor or indoor unit is blocked by obstacles. If so, remove any obstacles to ensure proper ventilation. * Check if the remote control display shows the time to clean the air filter. Clean the air filter if necessary. * Check if there are open doors or windows and shut them to prevent wind from coming in. * Use curtains or blinds if direct sunlight enters the room during cooling operation. * Also check the temperature setting, the fan speed setting, and the air flow angle.
What to do if the display 'TEST', the unit number and the operation lamp flash and the malfunction code appears on Daikin RXYQ12PY1?
If the display shows 'TEST', the unit number and the operation lamp flash, and a malfunction code appears, notify your Daikin dealer and report the malfunction code.
What to do if my Daikin RXYQ12PY1 system stops soon after starting?
If your Daikin Heat Pump system stops shortly after starting, check if the air inlet or outlet of either the outdoor or indoor unit is blocked by any obstacles. Remove any obstructions to ensure proper ventilation. Also, check if the remote control display indicates it's time to clean the air filter and clean the air filter if needed.
Describes the system's models, external appearance, combinations, and selection criteria.
Key considerations for designing the air conditioning system for optimal performance.
Detailed procedures and essential tasks for installing the system correctly.
Procedures for initial startup, checks, and configuration after installation.
Safety warnings and procedures for handling refrigerant leaks.
Final steps and explanations for the customer after installation.
Supplementary technical data, examples, and diagrams.
Installation guidelines specific to 50Hz models.
Installation guidelines specific to 60Hz models.
Operation guidance for 50Hz models, including safety and troubleshooting.
Operation guidance for 60Hz models, including safety and troubleshooting.
Essential safety guidelines and information for handling R-410A refrigerant.
General| Model | RXYQ12PY1 |
|---|---|
| Category | Heat Pump |
| Cooling Capacity | 33.5 kW |
| Heating Capacity | 37.5 kW |
| Power source | Electric |
| Refrigerant | R410A |
| Power Supply | 3-phase, 380-415 V, 50 Hz |
| Coefficient of Performance (Heating) | 4.0 |
| Operating Temperature Range (Cooling) | -5°C to 46°C |
| Operating Temperature Range (Heating) | -20 to 15.5°C |
| Dimensions (Outdoor Unit) | 1, 680 x 930 x 765 mm |
To Next Page