To Next PageTo Next PageWhat to do if Daikin RXYQ144TTJU system does not operate at all?
First, check for a power failure and wait until the power is restored. If the power failure happened during operation, the system will automatically restart once the power supply returns. Also, check if a fuse has blown and turn off the power supply. Check if the breaker is blown and turn the power on with the breaker switch in the OFF position.
Why Daikin Air Conditioner system stops soon after starting the operation?
The system might be stopping soon after starting because the air inlet or outlet of the outside or indoor unit is blocked by obstacles. Remove any obstacles to ensure good ventilation. Also, check if the remote controller display shows “Time to clean filter & element” and clean the air filter or element.
Why is my Daikin RXYQ144TTJU Air Conditioner operating, but cooling or heating is insufficient?
Insufficient cooling or heating may be due to blocked air inlets or outlets on the outside or indoor unit. Make sure to remove any obstacles to ensure proper ventilation. Also, check if the remote controller displays “Time to clean filter & element” and clean the air filter or element. Finally, verify the temperature setting.
How to stop direct sunlight entering the room during Daikin Air Conditioner cooling operation?
To prevent direct sunlight from entering the room during cooling operation, use curtains or blinds.
How to prevent open doors or windows while using Daikin RXYQ144TTJU?
Shut doors and windows to prevent wind from coming in.
General| Model | RXYQ144TTJU |
|---|---|
| Cooling Capacity (kW) | 14.0 |
| Heating Capacity (kW) | 16.0 |
| Power Supply | 380-415V, 3 Ph, 50Hz |
| Refrigerant | R410A |
| Operating Temperature (Cooling) | -5 to 46°C |
| Operating Temperature (Heating) | -15 to 24°C |
| Cooling Capacity (BTU/h) | 47600 |
| Heating Capacity (BTU/h) | 54600 |
Specifies acceptable operating temperatures and humidity levels for cooling and heating.
Explains the switches and display for selecting cooling, heating, or fan modes.
Details the preparation and availability for dry mode operation.
Guides on resetting the filter indicator after cleaning or replacement.
Explains how error codes are displayed and what to do when they appear.
Advises on precautions for specific control system configurations.
Provides guidance on maintenance tasks at the beginning and end of seasons.
