To Next PageTo Next PageWhat to do if Daikin RXYQ168TYDN system does not operate at all?
First, check for a power failure and wait until the power is restored. If the power failure happened during operation, the system will automatically restart once the power supply returns. Also, check if a fuse has blown and turn off the power supply. Check if the breaker is blown and turn the power on with the breaker switch in the OFF position.
Why Daikin RXYQ168TYDN Air Conditioner system stops soon after starting the operation?
The system might be stopping soon after starting because the air inlet or outlet of the outside or indoor unit is blocked by obstacles. Remove any obstacles to ensure good ventilation. Also, check if the remote controller display shows “Time to clean filter & element” and clean the air filter or element.
Why is my Daikin RXYQ168TYDN Air Conditioner operating, but cooling or heating is insufficient?
Insufficient cooling or heating may be due to blocked air inlets or outlets on the outside or indoor unit. Make sure to remove any obstacles to ensure proper ventilation. Also, check if the remote controller displays “Time to clean filter & element” and clean the air filter or element. Finally, verify the temperature setting.
How to stop direct sunlight entering the room during Daikin RXYQ168TYDN cooling operation?
To prevent direct sunlight from entering the room during cooling operation, use curtains or blinds.
How to prevent open doors or windows while using Daikin RXYQ168TYDN Air Conditioner?
Shut doors and windows to prevent wind from coming in.
General| Model | RXYQ168TYDN |
|---|---|
| Category | Air Conditioner |
| Cooling Capacity (kW) | 16.8 |
| Heating Capacity (kW) | 53.0 |
| Power Supply | 380-415V/50Hz/3Ph |
| Refrigerant | R410A |
| Energy Efficiency Ratio (EER) | 3.2 |
| Energy Efficiency Ratio (Cooling) | 3.2 |
Defines acceptable operating temperatures and humidity for cooling and heating modes.
Explains the switches and displays for selecting cooling, heating, or fan-only modes.
Details the preparation and availability for the dry operation mode.
Instructions on how to reset the filter indicator after cleaning or replacement.
Guidance on cleaning the remote controller's LCD screen and surface.
Explains how error codes are displayed and what to do when they appear.
Outlines precautions for managing multiple indoor units with group or dual remote controls.
Provides advice on checks and actions for the beginning and end of the operating season.
Guidance on contacting dealers for repair and information required.
Directs users to consult their local dealer for after-sales service.
Details the product's warranty period and requirements for service.
