To Next PageTo Next PageWhat to do if Daikin Air Conditioner system does not operate at all?
First, check for a power failure and wait until the power is restored. If the power failure happened during operation, the system will automatically restart once the power supply returns. Also, check if a fuse has blown and turn off the power supply. Check if the breaker is blown and turn the power on with the breaker switch in the OFF position.
Why Daikin RXYQ96TYDN Air Conditioner system stops soon after starting the operation?
The system might be stopping soon after starting because the air inlet or outlet of the outside or indoor unit is blocked by obstacles. Remove any obstacles to ensure good ventilation. Also, check if the remote controller display shows “Time to clean filter & element” and clean the air filter or element.
Why is my Daikin RXYQ96TYDN operating, but cooling or heating is insufficient?
Insufficient cooling or heating may be due to blocked air inlets or outlets on the outside or indoor unit. Make sure to remove any obstacles to ensure proper ventilation. Also, check if the remote controller displays “Time to clean filter & element” and clean the air filter or element. Finally, verify the temperature setting.
How to stop direct sunlight entering the room during Daikin RXYQ96TYDN cooling operation?
To prevent direct sunlight from entering the room during cooling operation, use curtains or blinds.
How to prevent open doors or windows while using Daikin RXYQ96TYDN?
Shut doors and windows to prevent wind from coming in.
General| Refrigerant | R410A |
|---|---|
| Cooling Capacity | 96, 000 BTU/h |
| Heating Capacity | 108, 000 BTU/hr |
| Weight | 272 kg |
| Dimensions (Outdoor Unit) | 990 x 940 x 1680 mm |
| Weight (Outdoor Unit) | 272 kg |
| Dimensions (W x D x H) | 990 x 940 x 1680 mm |
| SEER Rating | 4.30 |
| HSPF Rating | 3.70 |
| Operating Temperature (Cooling) | -5 to 46°C |
| Operating Temperature (Heating) | -20 to 15.5°C |
| Outdoor Unit Noise Level | 56 dBA |
Hazards related to fire, explosion, and toxic gas exposure.
Precautions against electrical shock and proper grounding.
Avoiding injury from moving parts, sharp edges, and improper handling.
Guidelines for proper unit usage and environmental considerations.
Safety warnings and initial checks for troubleshooting.
Steps to diagnose and resolve issues with system operation.
Steps to address problems with insufficient cooling or heating.
