What to do for Discharge temperature sensor malfunction (R2T) in Daikin RXYSCQ4TMV1B?
If you're experiencing a discharge temperature sensor malfunction (R2T): open circuit / short circuit - A1P (X12A) in your Daikin Air Conditioner, check the connection on the PCB or actuator.
Why Daikin RXYSCQ4TMV1B has insufficient refrigerant and the stop valve of an outdoor unit is left closed?
If the stop valve of your Daikin Air Conditioner's outdoor unit is closed and there is insufficient refrigerant, begin by opening the stop valve on both the gas and liquid sides. Verify that the additional refrigerant charge was completed correctly. Recalculate the necessary amount of refrigerant according to the piping length, and then add the appropriate amount of refrigerant.
How to fix Daikin RXYSCQ4TMV1B Air Conditioner when no power is supplied to the outdoor unit?
If no power is supplied to the outdoor unit of your Daikin Air Conditioner, check if the power wiring for the outdoor unit is connected correctly.
What to do if my Daikin RXYSCQ4TMV1B has insufficient supply voltage?
If your Daikin Air Conditioner is experiencing insufficient supply voltage, check if the supply voltage is supplied properly.
What to do if Daikin RXYSCQ4TMV1B piping and wiring are not connected correctly and the stop valve is closed?
If the stop valve of your Daikin Air Conditioner's outdoor unit is closed, and the piping and wiring of the specified indoor unit are not correctly connected to the outdoor unit, open the stop valve on both the gas and liquid side. Confirm that the piping and wiring of the specified indoor unit are correctly connected to the outdoor unit.
What to do if improper type of indoor units are connected to Daikin Air Conditioner?
If an improper type of indoor units are connected to your Daikin Air Conditioner, check the type of indoor units that are currently connected. If they are not proper, replace them with proper ones.
What causes High pressure sensor malfunction (S1NPH) in Daikin RXYSCQ4TMV1B Air Conditioner?
If you're facing a high pressure sensor malfunction (S1NPH): open circuit / short circuit - A1P (X17A) in your Daikin Air Conditioner, check the connection on the PCB or actuator.
How to fix Low pressure sensor malfunction (S1NPL) in Daikin RXYSCQ4TMV1B Air Conditioner?
To address a low pressure sensor malfunction (S1NPL): open circuit / short circuit - A1P (X18A) in your Daikin Air Conditioner, check the connection on the PCB or actuator.
How to troubleshoot Ambient temperature sensor malfunction (R1T) - A1P (X11A) in Daikin Air Conditioner?
To troubleshoot an ambient temperature sensor malfunction (R1T) - A1P (X11A) in your Daikin Air Conditioner, check the connection on the PCB or actuator.
What to do if Daikin Air Conditioner INV1 has unbalanced power supply voltage?
If INV1 has an unbalanced power supply voltage in your Daikin Air Conditioner, check if the power supply is within range.
General| Model | RXYSCQ4TMV1B |
|---|---|
| Refrigerant | R410A |
| Indoor Unit Noise Level | N/A (Outdoor unit only) |
| Indoor Unit Dimensions (WxHxD) | N/A (Outdoor unit only) |
| Indoor Unit Weight | N/A (Outdoor unit only) |
To Next Page
