SiUS12-928_B Main Functions
Function and Control 50
1.13.6 Auto-restart Function
If a power failure (including one for just a moment) occurs during the operation, the operation
restarts automatically when the power is restored in the same condition as before the power failure.
Note: It takes 3 minutes to restart the operation because the 3-minute standby function is activated.
1.13.7 WEEKLY TIMER Operation
CTXS/FTXS-L Series
Up to 4 timer settings can be saved for each day of the week (up to 28 settings in total).
Those 3 items of “ON/OFF”, “temperature” and “time” can be set.
Refer to page 102 for detail.
To Next Page
Loading...