HOME LEAVE Operation
HOME LEAVE operation is a function which allows you to record your preferred
temperature and airflow rate settings.
To start HOME LEAVE operation
To cancel HOME LEAVE operation
Before using HOME LEAVE operation.
1.
Press .
2.
Press again.
Display
• “ ” is displayed on the LCD.
• The HOME LEAVE lamp lights up.
• “ ” is no longer displayed on the LCD.
• The HOME LEAVE lamp goes off.
To set the temperature and airflow rate for HOME LEAVE operation
When using HOME LEAVE operation for the first time, please set the temperature and airflow rate for HOME LEAVE operation.
Record your preferred temperature and airflow rate.
Cooling
Heating
Temperature
77˚F (25˚C)
77˚F (25˚C)
Temperature
64-90˚F (18-32˚C)
50-86˚F (10-30˚C)
Airflow rate
AUTO
AUTO
Initial setting
Selectable range
Airflow rate
5 step,
“ ” and “ ”
5 step, “ ” and “ ”
HOME LEAVE operation will run with these settings the next time you use the unit. To change the recorded information, repeat
steps 1-3.
1. Press . Make sure “ ” is displayed in the remote controller display.
2. Adjust the set temperature with or as you like.
3. Adjust the airflow rate with FAN setting button as you like.
18
To Next Page
Loading...