What to do if my Daikin VKM50GAMV1 Ventilation Hood shows an Indoor Air Thermistor Error?
If your Daikin Ventilation Hood displays an indoor air thermistor error, it could be due to a faulty sensor, a broken wire, a faulty control PC board, or a faulty contact in the connector. You should replace the indoor air thermistor. If there is no faulty contact, replace the control PC board.
How to fix small discharged air and high sound in Daikin Industrial Equipment?
If the amount of discharged air is small and the discharging sound is high in your Daikin Industrial Equipment, it might be due to clogged air filter and heat exchange element. Clean these components to resolve the issue.
What to do if Daikin Industrial Equipment operation stops sometimes?
If your Daikin Industrial Equipment stops operating sometimes, it could be due to noise interference from other electrical appliances affecting communication. The unit should automatically restart when the noise disappears.
Why amount of discharged air is large with high sound in Daikin Industrial Equipment?
If the amount of discharged air is large and so is the sound in your Daikin Industrial Equipment, check whether the air filter and heat exchange element are installed. If not, install the air filter and heat exchange element.
General| Model | VKM50GAMV1 |
|---|---|
| Brand | Daikin |
| Width | 50 cm |
| Airflow | 300 m³/h |
| Number of Motors | 1 |
| Lighting | LED |
| Filter Type | Aluminum Grease Filter |
| Material | Stainless Steel |
| Color | Silver |
| Type | Range Hood |
To Next Page
