Specifications SiENBE37-701
30 Specifications
1-1 TECHNICAL SPECIFICATIONS FXCQ63MV3B FXCQ80MV3B FXCQ125MV3B
Air Filter Resin net with mold resistance
Air direction control Up and downwards
Refrigerant control Electronic expansion valve
Temperature control Microprocessor thermostat for cooling and heating
Safety devices PC board fuse
Fan motor thermal fuse Fan motor thermal protector Fan motor thermal protector
Drain pump fuse
Standard
Accessories
Standard Accessories Screws for fixing the paper pattern for installation
Quantity 4 4 4
Standard Accessories Washer for hanging bracket
Quantity 8 8 8
Standard Accessories Clamps
Quantity 1 1 1
Standard Accessories Installation and operation manual
Quantity 1 1 1
Standard Accessories Paper pattern for installation
Quantity 1 1 1
Standard Accessories Insulation for fitting
Quantity 2 2 2
Standard Accessories Drain hose
Quantity 1 1 1
Notes Nominal cooling capacities are based on : indoor temperature : 27°CDB, 19°CWB, outdoor temperature : 35°CDB,
equivalent refrigerant piping : 8m, level difference : 0m.
Nominal heating capacities are based on : indoor temperature : 20°CDB, outdoor temperature : 7°CDB, 6°CWB,
equivalent refrigerant piping : 8m, level difference : 0m.
Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat.
To Next Page
Loading...
