Daikin VRV III - Page 54

Specifications SiENBE37-701
42 Specifications
1-2 ELECTRICAL SPECIFICATIONS FXSQ20MV3B FXSQ25MV3B FXSQ32MV3B FXSQ40MV3B FXSQ50MV3B
Power
Supply
Name V3
Phase 1 1 1 1 1
Frequency Hz 50 50 50 50 50
Voltage V 230 230 230 230 230
Current Minimum circuit amps
(MCA)
A 0.50 0.50 0.50 0.60 0.90
Maximum fuse amps
(MFA)
A 16.00 16.00 16.00 16.00 16.00
Full load amps (FLA) A 0.40 0.40 0.40 0.50 0.70
Voltage
range
Minimum V -10%
Maximum V +10%
Notes Voltage range: units are suitable for use on electrical systems where voltage supplied to unit terminals is not below or
above listed range limits.
Maximum allowable voltage range variation between phases is 2%
MCA/MFA : MCA = 1.25 × FLA
MFA < 4 × FLA
next lower standard fuse rating minimum 16A
select wire size based on the MCA
instead of a fuse, use a circuit breaker
For more details concerning conditional connections, see http://extranet.daikineurope.com, select"E-Data Books".
Finally, click on the document title of your choice.
1-2 ELECTRICAL SPECIFICATIONS FXSQ63MV3B FXSQ80MV3B FXSQ100MV3B FXSQ125MV3B
Power
Supply
Name V3
Phase 1 1 1 1
Frequency Hz 50 50 50 50
Voltage V 230 230 230 230
Current Minimum circuit amps
(MCA)
A 1.10 1.40 1.50 2.00
Maximum fuse amps
(MFA)
A 16.00 16.00 16.00 16.00
Full load amps (FLA) A 0.90 1.10 1.20 1.60
Voltage
range
Minimum V -10%
Maximum V +10%
Notes Voltage range : units are suitable for use on electrical systems where voltage supplied to unit terminals is not below or
above listed range limits.
Maximum allowable voltage range variation between phases is 2%.
MCA/MFA : MCA = 1.25 × FLA
MFA < 4 × FLA
next lower standard fuse rating minimum 16A
select wire size based on the MCA
instead of a fuse, use a circuit breaker
For more details concerning conditional connections, see http://extranet.daikineurope.com, select"E-Data Books".
Finally, click on the document title of your choice.