Need help?Do you have a question about the DAITEM SH151AX 3 and is the answer not in the manual?
Explains the dual smoke and heat detection functions and their suitability for different fire types and environments.
Details the physical components of the detector, including fixing base, LEDs, and test button.
Instructions on where to place the guarantee sticker for validation.
Guide on how to disable the smoke detection function while keeping heat detection active.
Provides guidelines on optimal and prohibited locations for detector placement to ensure effectiveness and avoid false alarms.
Step-by-step instructions for mounting the detector base and attaching the detector unit.
Details the process of programming and integrating the detector with a Daitem alarm system.
Instructions for interconnecting multiple detectors into a wireless network.
Explains how to configure a detector to act as a relay for signal transmission.
How to temporarily deactivate the detector to prevent false alarms from activities like dusting.
Procedures to silence the alarm when triggered by non-hazardous smoke or heat.
Explains various fault codes indicated by LEDs and sounds, and troubleshooting steps.
Instructions on how to clean the detector's sensing head to maintain performance.
Steps for removing an old detector and installing a new one, including system re-programming.
Advice on protecting the detector during home renovation or painting work.
General| Battery Backup | Yes |
|---|---|
| Sound Level at 3m | 85 dB |
| Height | 50 mm |
| Detection Method | Optical |
| Sound Level | 85 dB |
| Connectivity | No |
| Relative Humidity | <95% RH |
| Standards | EN 14604 |
To Next Page