Need help?Do you have a question about the DAITEM SH630AX and is the answer not in the manual?
Details LED indications and information feedback for system status and commands.
Covers required tooling and power supply connection for device setup.
Explains how to switch between installation, test, and user modes.
Details the procedure for the control panel to recognise the keypad.
Manages beep sounds and the number of digits for access codes.
Procedures for modifying master and installer codes for security.
How to program, disable, enable, and restrict access for user codes.
How to assign specific commands or group functions to keypad buttons.
Controls back-lighting and procedures for deleting parameters.
Covers choosing location, testing range, and fixing the keypad.
Procedure to switch the keypad from installation to user mode.
Covers fault indications and battery replacement procedures.
A table summarizing parameter settings, sequences, and relevant pages.
Provides detailed technical specifications of the command keypad.
General| Type | Wireless Keypad |
|---|---|
| Model | SH630AX |
| Brand | DAITEM |
| Operating frequency | 868 MHz |
| Operating Temperature | -10°C to +55°C |
| Compatibility | DAITEM Alarm Systems |
| Display | LCD |
| Keys | 12 |
| Power | Battery powered |
| Power Supply | Battery |
| Humidity | 95% maximum |
To Next Page