EasyManua.ls Logo

Daitsu ADD20 - Notation for safe operation; Removing breakdowns; Unit does not operate troubleshooting

Daitsu ADD20
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 43 -
INGLES
1. When the unit works in LAUNDRY mode, keep it an appropriate distance away from the clothings,
and prevent the water from dropping onto it.
2. Before clean the unit or when do not use it for along period of time, unplug the power supply cord.
3. Do not wash the unit with water also put the unit close to water, explosive or flammable things.
4. Do not set the unit close to heat-generating devices or near inflammable and dangerous article.
5. Never put your fingers or objects into the intake or discharge ports.
6. Do not sit or stand on the unit.
7. Discard water that has collected in the tank timely.
8. Do not run the dehumidifier in an closed area such as inside closets, or fire can take place.
9. Do not use the unit for special purposes such as edible items, objects of art or scientific materials are
stored.
10. Install drain piping in a downhill grade to make sure that condensed water can be drained conti-
nuously.
11. If the supply cord is damaged, it must be replaced by the manufacture or its service agent or a simi-
larly qualified person in order to avoid a hazard.
When use the unit, please observe the following safety precautions:
Maintenance
Notation for safe operation
If a condition listed below occurs, please check the following items to help you to save your time and cost.
Maintenance
Removing breakdowns
Condition Cause
What to do
The unit does not operate.
Has the power supply cord
been disconnected?
Is the temperature of the
room above 38ºC or below
2ºC.
Plug the power supply cord into the
outlet.
Discard the water in the drainage tank,
and then reposition the tank.
Is the “ ” lamp blin-
king?(The tank is full or in a
wrong position.)
The protection device is actuated and
the unit can not be started in case ope-
ration is under the bad environment (in
that case, please do not use the dehu-
midifier).

Related product manuals