Daitsu APD 9AM - Operating Instructing for the Air Conditioner

ENGLISH
45
Before starting this unit
1- Select a suitable location, make sure you have easy access to an electrical outlet.
2- Install the Flexible Exhaust Hose and the Adjustable Window Slider Kit as depicted in Fig.
Note: Step 2 is required only while using the “cooling mode”.
3- Plug the unit into a 220V-240V~50Hz grounded electrical outlet.
4- Make sure the water pump drain hose is correctly installed.
5- Press the “on/off” button to turn on the unit.
(1) Before use
Dehumidifying and Cooling Operations
- The operating range for dehumidifying is 10ºC-30ºC/50ºF-86ºF, and the operating range for cooling operating is
17ºC-30ºC/63ºF-86ºF.
- If the cooling or dehumidifying operations have been switched off and need switching on again in a short time, allow approxi-
mately three minutes for the cooling or dehumidifying operations to resume.
- Make sure the water pump drain hose is correctly connected to the unit.
Power supply:
- Insert the AC Power Plug to a AC socket.
- Do not connect the air conditioner to a multiple socket outlet which is also being used for other electrical appliance.
- Be sure the power supply is AC 220V-240V~ 50Hz.
OPERATING INSTRUCTING FOR THE AIR CONDITIONER
Water pump
drain hose
APD12TEng 18/9/09 08:17 Página 45