Need help?Do you have a question about the Daitsu ASD 9UI-DB and is the answer not in the manual?
General| Type | Split System |
|---|---|
| Cooling Capacity | 9000 BTU/h |
| Heating Capacity | 9000 BTU/h |
| Power Supply | 220-240V, 50Hz |
| Power Consumption (Cooling) | 0.82 kW |
| Refrigerant | R-410A |
| Dimensions (Indoor Unit) | 773x185x250 mm |
| Weight (Indoor Unit) | 8 kg |
| Net Weight (Indoor Unit) | 8 kg |
| Air Flow (High) | 500 m³/h |
| Net Weight (Outdoor Unit) | 25 kg |
| Noise Level (Indoor) | 37 dB(A) |
| Operating Temperature (Cooling) | 18°C to 43°C |
| Dimensions (Outdoor Unit) | 700x245x544 mm |
| Cooling Capacity (kW) | 2.64 kW |
Lists the specific Daitsu air conditioner models covered by this service manual.
Presents comprehensive technical specifications for Daitsu air conditioner models DS-9KIDB and DS-12KIDB.
Provides outline drawings and key dimensions for the Daitsu indoor air conditioning unit.
Details the physical outline and dimensions for Daitsu outdoor air conditioning units (09K, 12K).
Explains the purpose of each button on the Daitsu air conditioner remote controller.
Illustrates and describes the various icons displayed on the remote controller for different operating modes.
Details WIFI, battery replacement, and emergency operation of the remote controller.
Explains indoor unit modes (cooling, drying, heating, auto, fan) and other controls like timer and sleep.
Details outdoor unit operation modes, including cooling, heating, and refrigerant recovery functions.
Essential safety guidelines for electrical, installation, refrigerant handling, and general warnings.
Specifies qualification requirements, installation notes, maintenance, and safe refrigerant handling procedures.
Lists and illustrates the main tools necessary for performing installation and maintenance tasks.
Provides visual diagrams showing required clearances and dimensions for unit installation.
Presents a flowchart outlining the sequential steps involved in installing the air conditioner unit.
Details electrical connection requirements, safety precautions, and grounding standards for proper installation.
Step-by-step guide for selecting the location and installing the indoor unit and its mounting frame.
Instructions for connecting the refrigerant pipes and drain hose to the indoor unit.
Guide for wiring the indoor unit, binding pipes, and securely hanging the unit on its frame.
Procedures for installing the outdoor unit, including support fixing, drain joint, and pipe connections.
Covers final wiring, pipe neatening, vacuuming, leak detection, and post-installation verification.
To Next Page
