What to do if my Daiwa DWA-9150 Massager operation fails to start?
If the Daiwa Massager fails to start, check if the power plug is securely connected to the wall outlet and ensure the power switch is in the “on” position. Also, verify if the fuse has blown out, and if so, replace it with another fuse of the same type.
What to do if Airbags within the seat and the legrests of my Daiwa DWA-9150 Massager fail to work properly?
If the airbags in the seat and legrests of your Daiwa Massager aren't working, first check the air tubes for any blockages and clean them out. If the issue continues, it could be due to an undetected error. Try turning the power off and then on again. If the problem still persists after restarting, disconnect the power plug from the wall outlet and contact an authorized repairman.
Why are there noises during Daiwa Massager operation?
The noises heard during the operation of the Daiwa Massager are normal. They arise from friction between the massage rollers and the leather cover.
Details the terms and conditions of the consumer warranty, including duration and coverage.
Outlines essential safety measures to prevent electric shock, burns, fire, and personal injury during operation.
Explains the layout and functions of the main controller for operating the massage chair.
Step-by-step guide for assembling the massage chair, focusing on connecting the footrest.
To Next Page
General
