Need help?Do you have a question about the Daiwha DI-6000 and is the answer not in the manual?
General| Brand | Daiwha |
|---|---|
| Model | DI-6000 |
| Category | Water Pump |
| Language | English |
Details critical warnings and cautions for product use and environment.
Explains the purpose and operation of each button on the infusion pump.
Describes the icons and information displayed on the pump's LCD screen.
Steps for physically mounting the pump and connecting it to a power source.
Guide on correctly installing the I.V. Set, including clamp and sensor placement.
Details how to set flow rate, total volume, and remaining time for normal infusion.
Steps to select drugs and configure infusion parameters for drug delivery.
How to set concentration, dose, weight, and volume for dosage-based infusions.
Procedures for turning the infusion pump on and off safely.
How to operate the pump from standby, including I.V. Set code setting.
Steps for initiating and halting the infusion process, including button controls.
Describes how alarms are signaled and displayed on the device.
Classifies alarms by urgency and indicates their LCD color.
Explains causes, indicators, and clearing methods for occlusion alarms.
Details causes, indicators, and clearing for air bubble and door open alarms.
Covers drop sensor alarms, battery overheating, and empty battery alerts.
Covers time out alarms and how to interpret and reset error codes.
To Next Page